مسعود علیزاده
استادیار، گروه فناوری، پژوهشکده سرامیک، پژوهشگاه مواد و انرژی
[ 1 ] - بررسی خواص فیزیکی، شیمیایی و پاسخ های سلولی بیوسرامیک ژیپس حاوی غلظت های مختلف استرانسیم
هدف این مقاله بررسی اثر وارد کردن مقادیر مختلف یون استرانسیم (با درصد وزنی 0.19-2.23) به درون شبکه بیوسرامیک سولفات کلسیم بر خواص فیزیکی، ساختاری و زیستی در محیط in vitro و مقایسه آن با خواص نمونه سولفات کلسیم دی هیدراته (ژیپس) خالص به عنوان نمونه شاهد است. ژیپس حاوی استرانسیم (Sr-ژیپس) از مخلوط کردن پودر سولفات کلسیم نیمه هیدراته و محلول نیترات استرانسیم حاصل شد، سپس نمونه ها با آب مقطر شستشو ...
[ 2 ] - بررسی تف جوشی مایکروویو و اثرات آن بر ساختار بلوری، ریزساختار و خواص مایکروویو دی الکتریک سرامیک Li2TiO3
در این پژوهش زینتر تفجوشی سرامیک Li2TiO3 به دو روش معمولی و مایکروویو انجام شد. بیشینه چگالی g/cm3 08/3 (58/90 درصد چگالی تئوری) به روش زینتر تفجوشی معمولی در دمای ˚C1200 و با زمان نگهداری 3سه ساعت بهدست آمد در حالیکه بیشینه چگالی g/cm3 12/3 (76/91 درصد چگالی تئوری) به روش زینتر تفجوشی مایکروویو در دما...
[ 3 ] - Preparation of aliened porous Ni-GDC nano composite by freeze-casting process
This current study reports preparation of Nickel-Gadolinium doped Ceria (Ni-GDC) composite via controlled unidirectional freeze casting of aqueous-based GDC slurry completed with nickel infiltrated into the porous GDC samples. Gadolinium doped ceria powder prepared by gel-combustion synthesis method. The oxide powder was confirmed to be the fluorite-structured of Ce0.8Gd0.2O1.9 solid solution b...
[ 4 ] - The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks
Rheological characteristics of powder injection molding PIM feedstocks play an important role in final properties of manufactured MMCs. In this study, six formulations composed of magnesium and SiC powder (99:1 wt.%) and a specific binder were prepared to investigate the influence of binder composition, powder to binder ratio, time and temperature on rheological properties of the feedstock. Th...
[ 5 ] - Thermal expansionc oefficient of Ln0.6Sr0.4Co0.2M0.8O3−δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) perovskite oxide
In this study, Thermal expansion coefficient (TEC) variation of Ln0.6Sr0.4Co0.2M0.8O3−δ (Ln=La,Nd,Sm and M= Fe,Ni,Mn) perovskite oxide have been evalouated. Different compounds have been prepared and thermal expansion coefficient have been meseaured in different temperature by means of dilatometer analysis. Structural parameters of compounds have been determined by X-ray diffraction and Field ...
[ 6 ] - Effects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding
This study investigates the effects of micro- and nano-sized SiC powder on the rheological behavior of Al based feedstocks for powder injection molding (PIM). Different compositions of Al feedstocks with additions of micro and nano-SiC powder were prepared and their rheological properties were measured with a rotational rheometer. The effects of SiC content and shear rate were investigated and...
[ 7 ] - PHASE STABILITY AND CONDUCTIVITY OF δ-Bi2O3 WITH MIXTURE OF YTTRIUM AND YTTERBIUM OXIDES
In this research Bi2O3 was doped with mixtures of 8, 10, 12 and 18 mol % of Y2O3 and Yb2O3 to stabilizing the δ-Bi2O3 phase using solid state reaction technique. Experimental samples were fabricated by isostatic pressing and sintering at 850 °C for 24 h. X-ray diffraction analysis detected cubic phase (δ-Bi2O3) as the sole stable crystalline phase in samples including 12 and 18 mol % of Y2O3 an...
Co-Authors