بررسی آزمایشگاهی اثر موقعیت تک آبشکن بر عمق آبشستگی اطراف آن در خم180 درجه

نویسندگان

  • مرادی, امین
چکیده مقاله:

In order to study the effect of spur dike position in the bend on the process of scoring, some tests were done in a laboratory flume of Plax glass material with 180 deg bend and R/B=4/7. In this research, by setting an spur dike in the laboratory flume with positions of 30,60,90,120,150and 160 degrees, discharge rates of 20 ,24 and 28 Lit/s , and fixed depth of 13 cm, the process of scoring around spur dike in pure water was investigated. For flume bed, gravels of uniformly granulated sizes were used. The results showed that the maximum scoring in the length of river bend is obtained with increasing the rate and angle of position up to the angle of 60 deg, and then from position of 60 deg the rate of scoring decreases up to the position of 120 deg, and finally the increase in the position up to 160 deg results in the maximum scoring.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بررسی آزمایشگاهی اثر موقعیت تک آبشکن بر عمق آبشستگی اطراف آن در خم۱۸۰ درجه

در این مطالعه به منظور بررسی اثر موقعیت نصب آبشکن در قوس بر فرآیند آبشستگی، آزمایش هایی در یک فلوم آزمایشگاهی با قوس 180 درجه با 7/4 = rc/b (r = شعاع مرکزی قوس، b= عرض فلوم) از جنس پلاکسی گلاس انجام پذیرفت. در این تحقیق با قرار دادن یک آبشکن در فلوم آزمایشگاهی با موقعیت های 30، 60، 90، 120، 150 و 160 درجه با دبی های 20، 24 و 28 لیتر بر ثانیه و عمق ثابت جریان 13 سانتی متر پدیده آبشستگی حول آبشکن...

متن کامل

بررسی آزمایشگاهی اثر شکاف در بدنه آبشکن بر کنترل آبشستگی اطراف آن در قوس 180 درجه

In this study, the performance of slot in the spur dike was evaluated as a way to reduce the scouring around the installed flat spur dike in a 180 degree bend and the development of scouring in the slotted spur dike was compared with that of the spur dike with no slot. To evaluate the effect of the slot on the development of scouring around it, a flat spur dike made of Plax Glass was installed ...

متن کامل

بررسی اثر افزایش طول بال آبشکن L شکل بر آبشستگی اطراف آن در قوس 90 درجه

     آبشکن از جمله سازه­های متداول در ساماندهی و کنترل فرسایش درساحل رودخانه است و سبب دور کردن جریان های قوی از ساحل و هدایت جریان به سمت محور رودخانه می­گردد. ازسویی تغییر الگوی جریان باعث آبشستگی در اطراف آبشکن می­شود. این مطالعه سعی در بررسی تأثیر افزایش طول در بال آبشکن بر عمق آبشستگی دارد. آزمایش­ها در فلوم قوس 90 درجه با سه طول بال مختلف ، سه دبی متفاوت و عمق ثابت انجام شد و در ضمن با آب...

متن کامل

اثر آبشکن بر کاهش عمق آبشستگی اطراف پایه پل‌ها در پیچ رودخانه‌ها

The most important cause of concern about the stability of bridge foundation is the occurrence of scour around bridge piers. Therefore, different methods have been proposed to prevent or reduce scouring around bridge piers. The use of groynes is one of the modern methods to control and reduce local scour. In the present study, the effect of a solid groyne on reduction of the scour depth around ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 13  شماره 50

صفحات  43- 50

تاریخ انتشار 2010-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

کلمات کلیدی برای این مقاله ارائه نشده است

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023