Design and Construction of Load Cell of a Three Point Hitch Dynamometer for Tractor John Deere 3140

نویسندگان

  • Iman Ahmadi Department of Agronomy, Khorasgan (Isfahan) Branch, Islamic Azad University, Isfahan, Iran
  • Mohammad Ali Ghazavi Department of Agronomy, Khorasgan (Isfahan) Branch, Islamic Azad University, Isfahan, Iran
  • Mohsen Beigi Department of Mechanics, Tiran Branch, Islamic Azad University, Tiran, Iran
چکیده مقاله:

Measurement of the values of forces in tractor arms is of great importance due to draft of agricultural equipment. These values can be used for testing and evaluation of the agricultural machinery, selection of suitable tractor, etc. The tools which are used for measurement of the forces are called dynamometer. The main objective of the present study was to design and evaluate a load cell for integral three point hitch John Deere 3140 tractor. These load cells are installed on the bottom links and measured draft forces. The sensitive parts of these load cells are square side pins on which some strain gages were installed and the force was measured. This load cells do not have the errors usually faced with in other load cells such as reciprocal sensitivity and hitch point movement. Besides, their manufacturing cost is very lower than the other similar load cells.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

design and construction of load cell of a three point hitch dynamometer for tractor john deere 3140

measurement of the values of forces in tractor arms is of great importance due to draft of agricultural equipment. these values can be used for testing and evaluation of the agricultural machinery, selection of suitable tractor, etc. the tools which are used for measurement of the forces are called dynamometer. the main objective of the present study was to design and evaluate a load cell for i...

متن کامل

design, construction and calibration of an adjustable three-point hitch dynamometer for common agricultural tractors in iran

this study describes the design, construction and calibration of an adjustable three-point hitch dynamometer. the dynamometer frame design was based on an inverted u-shaped frame that was mounted between the tractor links and implement. the dynamometer frame design allows for use in both category i and ii three-point hitch systems because of its flexibility in a lower point hitch spread and mas...

متن کامل

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

ساخت و آزمون کارگاهی دینامومتر اتصال سه نقطه و چرخ پنجم سرعت سنج تراکتوری

For measuring draft force and drawbar power requirements for mounted implements, precise instruments such as three-point hitch dynamometers and tractor speed measurement devices are needed. In this research, a frame-type three-point hitch dynamometer was built and evaluated. Forces applied to dynamometer are measured by three separate load cells located on a frame which can be attached to tract...

متن کامل

ساخت و آزمون کارگاهی دینامومتر اتصال سه نقطه و چرخ پنجم سرعت سنج تراکتوری

For measuring draft force and drawbar power requirements for mounted implements, precise instruments such as three-point hitch dynamometers and tractor speed measurement devices are needed. In this research, a frame-type three-point hitch dynamometer was built and evaluated. Forces applied to dynamometer are measured by three separate load cells located on a frame which can be attached to tract...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 2

صفحات  47- 58

تاریخ انتشار 2014-05-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023