Elastic Buckling of Moderately Thick Homogeneous Circular Plates of Variable Thickness

نویسندگان

  • M.H Naei Faculty of Mechanical Engineering, College of Engineering, University of Tehran
  • S.K Jalali Faculty of Mechanical Engineering, College of Engineering, University of Tehran
چکیده مقاله:

In this study, the buckling response of homogeneous circular plates with variable thickness subjected to radial compression based on the first-order shear deformation plate theory in conjunction with von-Karman nonlinear strain-displacement relations is investigated. Furthermore, optimal thickness distribution over the plate with respect to buckling is presented. In order to determine the distribution of the prebuckling load along the radius, the membrane equation is solved using the shooting method. Subsequently, employing the pseudospectral method that makes use of Chebyshev polynomials, the stability equations are solved. The influence of the boundary conditions, the thickness variation profile and aspect ratio on the buckling behavior is examined.  The comparison shows that the results derived, using the current method, compare very well with those available in the literature.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Nonlinear Buckling of Circular Nano Plates on Elastic Foundation

The following article investigates nonlinear symmetric buckling of moderately thick circular Nano plates with an orthotropic property under uniform radial compressive in-plane mechanical load. Taking into account Eringen nonlocal elasticity theory, principle of virtual work, first order shear deformation plate theory (FSDT) and nonlinear Von-Karman strains, the governing equations are obtained ...

متن کامل

Load Carrying Capacity of Simply Supported Variable Thickness Circular Plates

The calculation of the load carrying capacity of variable thickness circular plates subjected to arbitrary rotational symmetric loading is presented. The analysis considers plate materials that obey either the square or the Tresca yield criterion. By using upper and lower bound theorems of limit analysis, corresponding estimations for the load carrying capacity of the plate are obtained. It is ...

متن کامل

Investigation on Buckling of Orthotropic Circular and Annular Plates of Continuously Variable Thickness by Optimized Ritz Method

This paper investigates symmetrical buckling of orthotropic circular and annular plates of continuous variable thickness. Uniform compression loading is applied at the plate outer boundary. Thickness varies linearly along radial direction. Inner edge is free, while outer edge has different boundary conditions: clamped, simply and elastically restraint against rotation. The optimized RayLeigh-Ri...

متن کامل

A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations

Based on the differential transformation method, a semi-analytical solution is developed for free vibration and modal stress analyses of variable thickness two-directional functionally graded circular plates with restrained edges, resting on elastic foundations. Variations of the material and geometry parameters are monitored by five distinct exponential functions. The presented non-dimensional...

متن کامل

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Asymmetric buckling analysis of the circular FGM plates with temperature-dependent properties under elastic medium

In this paper, Asymmetric buckling analysis of functionally graded (FG) Circular plates with temperature dependent property that subjected to the uniform radial compression and thermal loading is investigated. This plate is on an elastic medium that simulated by Winkler and Pasternak foundation. Mechanical properties of the plate are assumed to vary nonlinearly by temperature change. The equili...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 2  شماره 1

صفحات  19- 27

تاریخ انتشار 2010-03-30

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023