Oxidative Desulfurization of Sour Gas Condensate and Optimization of Parameters with Response Surface Methodology

نویسندگان

  • Amin Shafeghat Petroleum Refining Technology Development Division, Research Institute of Petroleum Industry, Tehran, Iran
  • Jafar Tofighi Darian Chemical Engineering Department, Tarbiat Modares University, Tehran, Iran
  • maryam ghaedian Petroleum Refining Technology Development Division, Research Institute of Petroleum Industry, Tehran, Iran
  • mehdi alibolandi Chemical Engineering Department, Tarbiat Modares University, Tehran, Iran
  • Sayed Javid Royaee Petroleum Refining Technology Development Division, Research Institute of Petroleum Industry, Tehran, Iran
چکیده مقاله:

Reducing environmental pollution via elimination of sulfur compounds from gas condensate was the aim of this research. Whereby oxidative desulfurization from gas condensate with 3200 ppm initial sulfur was accomplished by hydrogen peroxide (30%wt) as oxidant and formic acid as catalyst. The sulfones after generation in the oxidation step were extracted through a method of liquid-liquid extraction by acetone as a polar solvent. The effects of variables: coefficient of oxidant to sulfur molar ratio (O/S), temperature (T), and coefficient of catalyst to oxidant molar ratio (C/O) were investigated. The experiments were designed with response surface methodology based on central composite design (CCD). The results of experiments demonstrated that none of these variables (O/S, T, and C/O) have any interaction, and among these variables, O/S plays a significant role with the most influence on desulfurization and C/O and T are of the second and third primary of importance, respectively. In addition, 86% desulfurization was obtained in the optimum conditions.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

hazard evaluation of gas condensate stabilization and dehydration unit of parsian gas refinery using hazop procedures

شناسایی مخاطرات در واحد 400 پالایشگاه گاز پارسیان. در این پروزه با بکارگیری از تکنیک hazop به شناسا یی مخاطرات ، انحرافات ممکن و در صورت لزوم ارایه راهکارهای مناسب جهت افزایش ایمنی فرا یند پرداخته میگردد. شرایط عملیاتی مخاطره آمیز نظیر فشار و دمای بالا و وجود ترکیبات مختلف سمی و قابل انفجار در واحدهای پالایش گاز، ضرورت توجه به موارد ایمنی در این چنین واحدهایی را مشخص می سازد. مطالعه hazop یک ر...

preparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis

کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.

Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology

Centrifugal casting is one of the advanced casting branches widely used in the metallurgical industry in which the centrifugal force helps strengthen the workpiece material. The present work attempt to study the effect of the horizontal and vertical centrifugal casting parameters included the centrifugal mold rotation speeds and G-factors values on the quality of the product. The work has been ...

متن کامل

Photocatalytic Removal of Amaranth Optimization Using Response Surface Methodology

Since Amaranth (AM) is one of the dye compounds which is harmful to human’s life its removal from industrial waste water would reduce their environmental impact and health effect. Copper nanoparticle (CuNP) is a simple and eco-friendly material which can be used to remove this pollutant. In this paper, copper nanoparticles were synthesized, for removal of AM dye. The experiments were designed b...

متن کامل

Prediction and Optimization of Mechanical Properties of St52 in Gas Metal Arc Weld Using Response Surface Methodology and ANOVA

Many researchers have developed algorithms to predict welding parameters. The variety of welding types is broad because the confine mixture of pressure and temperature could be selected. This paper introduces a response surface methodology (RSM) for optimization and prediction of the influence of Ar and CO2 gases and electrical current on tensile strength of St52’s gas metal arc weld (GMAW) lin...

متن کامل

Bentazon removal from aqueous solution by reverse osmosis; optimization of effective parameters using response surface methodology

Although bentazon is widely used as an agricultural herbicide, it is harmful to humans and poses many environmental threats. This study focused on the treatment of wastewater contaminated with bentazon pesticides using membrane technology. In this regard, low-pressure reverse osmosis (RO) was employed as it has already been used in the removal of other micro-pollutants. The effects of process v...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 31  شماره 1

صفحات  13- 23

تاریخ انتشار 2020-03-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023