Theoretical and experimental investigation into incident radiation on solar conical collector

نویسندگان

  • Amin Reza Noghrehabadi Mechanical Engineering Department, Faculty of Engineering, Shahid Chamran University, Ahvaz, Iran
  • Ebrahim Hajidavaloo Mechanical Engineering Department, Faculty of Engineering, Shahid Chamran University, Ahvaz, Iran
  • Farshad Torabi Faculty of Mechanical Engineering, K. N. Toosi University of Technology, Tehran, Iran
  • Mojtaba Moravej Moravej Mechanical Engineering Department, Faculty of Engineering, Shahid Chamran University, Ahvaz, Iran
چکیده مقاله:

The geometry of a collector is one of the important factors that can increase the incident radiation on the collector surface. In the present study, the incident radiation for a stationary collector with cone geometry, i.e. a conical collector, is theoretically and experimentally investigated. This type of collector is always stable and does not need a fixture to install. Moreover, it has a symmetric geometry, with all its sides facing the sun. The main advantage of this collector is its ability to receive beam, diffuse, and ground-reflected radiation throughout the day. The variation of the incident radiation is theoretically estimated by using an isotropic sky model based on the available data. The theoretical data are validated by an experimental test of a conical collector of a specific size. The results show that the conical solar collector is more operative in receiving total solar radiations than a horizontal plate such as a flat-plate collector and can be a suitable option for solar water heating. A calculation of the incident radiation shows that the incident radiation is maximized when the cone angle of the conical collector is equal to the latitude of the site test.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

theoretical and experimental investigation into incident radiation on solar conical collector

the geometry of a collector is one of the important factors that can increase the incident radiation on the collector surface. in the present study, the incident radiation for a stationary collector with cone geometry, i.e. a conical collector, is theoretically and experimentally investigated. this type of collector is always stable and does not need a fixture to install. moreover, it has a sym...

متن کامل

An experimental investigation on the performance of a symmetric conical solar collector using SiO2/water nanofluid

One of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. The present study experimentally investigated the effect of SiO2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. The conical solar collector with 1 m2 area and normal to the earth was tested in Ahvaz, a city in th...

متن کامل

An experimental investigation of performance of a 3-D solar conical collector at different flow rates

The shape of a solar collector is an important factor in solar-to-thermal energy conversion. Conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. Flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. The present study is an experimentally investigated of the performance of the solar coni...

متن کامل

an experimental investigation on the performance of a symmetric conical solar collector using sio2/water nanofluid

one of the effective methods to improve the thermal efficiency of solar collectors is using nanofluids as the coolant. the present study experimentally investigated the effect of sio2/water nanofluid with 1% mass fraction on the performance of a symmetric collector, i.e. conical solar collector. the conical solar collector with 1 m2 area and normal to the earth was tested in ahvaz, a city in th...

متن کامل

an experimental investigation of performance of a 3-d solar conical collector at different flow rates

the shape of a solar collector is an important factor in solar-to-thermal energy conversion. conical shape is one of the stationary and symmetric shapes that can be employed as a solar water heater. flow rate of working fluid on the solar collector has an important effect on the efficiency of the collector. the present study is an experimentally investigated of the performance of the solar coni...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 2

صفحات  123- 132

تاریخ انتشار 2016-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023