× خانه ژورنال ها پست ها ثبت نام ورود

Thermo-Elastic Analysis of Non-Uniform Functionally Graded Circular Plate Resting on a Gradient Elastic Foundation

نویسنده

  • A Behravan Rad Engineering Department ,Zamyad Company,15Km Karaj Old Road, P.O 1386183741, Tehran, Iran

چکیده

Present paper is devoted to stress and deformation analyses of heated variable thickness functionally graded (FG) circular plate with clamped supported, embedded on a gradient elastic foundation and subjected to non-uniform transverse load. The plate is coupled by an elastic medium which is simulated as a Winkler- Pasternak foundation with gradient coefficients in the radial and circumferential directions during the plate deformation. The temperature distribution is assumed to be a function of the thickness direction. The governing state equations are derived in terms of displacements and temperature based on the 3D theory of thermo-elasticity. These equations are solved using a semi-analytical method to evaluate the deformation and stress components in the plate. Material properties of the plate except the Poisson's ratio are assumed to be graded continuously along the thickness direction according to an exponential distribution. A parametric study is accomplished to evaluate the effects of material heterogeneity indices, foundation parameters, temperature difference between the top and bottom surfaces of the plate and thickness to radius ratio on displacements and stresses. The results are reported for the first time and the new results can be used as a benchmark solution for the future researches.

برای دسترسی به متن کامل این مقاله و 10 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

ورود

منابع مشابه

present paper is devoted to stress and deformation analyses of heated variable thickness functionally graded (fg) circular plate with clamped supported, embedded on a gradient elastic foundation and subjected to non-uniform transverse load. the plate is coupled by an elastic medium which is simulated as a winkler- pasternak foundation with gradient coefficients in the radial and circumferential...

In this study, two goals are followed. First, by means of the Generalized Differential Quadrature (GDQ) method, parametric analysis on the vibration characteristics of three-parameter Functionally Graded (FG) beams on variable elastic foundations is studied. These parameters include (a) three parameters of power-law distribution, (b) variable Winkler foundation modulus, (c) two-parameter elasti...

In this paper, a refined plate theory is applied to investigate the free vibration analysis of functionally graded nanocomposite sandwich plates reinforced by randomly oriented straight carbon nanotube (CNT). The refined shear deformation plate theory (RSDT) uses only four independent unknowns and accounts for a quadratic variation of the transverse shear strains across the thickness, and satis...

 In the present paper damped vibrations of non-homogeneous infinite rectangular plate of parabolically varying thickness resting on elastic foundation has been studied. Following Lévy approach, the equation of motion of plate of varying thickness in one direction is solved by quintic spline method. The effect of damping, elastic foundation and taperness is discussed with permissible range of pa...

In this paper, static analysis of functionally graded annular plate resting on elastic foundation with various boundary conditions is carried out by using a semi-‍analytical approach‍ (SSM‍-DQM). The differential governing equations are presented based on the three dimensional theory of elasticity. The plate is assumed isotropic at any point, while material properties to vary exponentially thro...

In this study, the analysis of transient thermoelastic response of a functionally graded (FG) non-axisymmetric viscoelastic cylinder is presented. The material properties are assumed to be time- dependent and radially and circumferentially non-homogeneous. The finite element (FE) formulations of the thermoelastic problem are obtained using the virtual work method and all the coupling terms are ...