Mohammad Karamoozian
Department of Mining, Petroleum and Geophysics, Un iversity of Shahrood, Shahrood, 36199-95161, Iran
[ 1 ] - An investigation of the corrosive wear of steel balls in grinding of sulphide ores
Ball mills are common grinding equipment in mineral processing industries. Ball wear results from three mechanisms namely impact, abrasion and corrosion. Of these, the corrosion mechanism is the least investigated, due to its chemical-electrochemical nature. Therefore, the aims of this research were to investigate the grinding chemistry influence (slurry pH, solid percentage, water chemistry an...
[ 2 ] - Optimization of parameters affecting recovery of copper from Sarcheshmeh low-grade sulfide ore using Bioleaching
In this work, the parameters affecting the recovery of copper from the low-grade sulfide minerals of Sarcheshmeh Copper Mine were studied. A low-grade sulfide ore was used with a copper grade of 0.25%, which was about 28% of the mineral oxide, and the sulfide minerals made up the rest. Much more sulfide minerals were found to be pyrite and most of the gangue minerals were quartz, anorthite, bio...
[ 3 ] - Investigation on selective rhenium leaching from molybdenite roasting flue dusts
The possibility of selective leaching process was investigated during molybdenite flue dust leaching to recover its rhenium content. The results show that addition of alcohols to water makes the medium less favorable for molybdenum transfer into aqueous phase. On the other hand, addition of small amounts of alcohols (5-15%) makes a noticeable separation of rhenium over molybdenum, but by increa...
نویسندگان همکار