Samira Shirvani
Biomass Conversion Science and Technology (BCST) Division, Iran Polymer and Petrochemical Institute, P.O. Box 14975-115, Tehran, Iran.|Faculty of Petrochemicals, Iran Polymer and Petrochemical Institute, P.O. Box 14975-112, Tehran, Iran.
[ 1 ] - Promoting effects of calcium on the performance of Cu-MgO catalyst in hydrogenation of furfuraldehyde
In the present study, the effects of calcium doping on the performance of the co-precipitated Cu-MgO catalysts prepared with different calcium loadings in the selective hydrogenation of furfuraldehyde were investigated. The results proved that the addition of this promoter had a remarkable impact on the catalytic performance. The conversion of furfuraldehyde enhanced up to 83% and the furfuryl ...
[ 2 ] - Hydroconversion of Furfural over Cu-Cr/SiO2 Nanocatalysts: A Comparative Study
Furfural is one of the most promising chemical platforms with bright perspective with respect to the production of biobased chemicals and fuels from lignocellulosic material. Globally, the majority of this biomass derived chemical is converted into furfuryl alcohol, a building block in polymers industry. The vapor-phase hydrogenation of furfural over copper species dispersed on two types of sil...
[ 3 ] - Mechanism Discrimination for Bimolecular Reactions: Revisited with a Practical Hydrogenation Case Study
The governing mechanism of surface reactions is a fundamental concern in heterogeneous catalysis. The Langmuir–Hinshelwood (LH) mechanism is widely accepted to control the surface reactions in many catalytic systems. This contribution derives and compares several important surface rate equations to evaluate their quality of fitting to the experimental data collected for a vapor-phase hydrogenat...
[ 4 ] - Effect of Calcination Rate on Performance of Co-precipitated Cu-MgO Catalyst in Hydrogenation of Furfural
Co-precipitated Cu-MgO catalysts were prepared and evaluated for the gas-phase hydrogenation of furfural. The effect of heating rate at the calcination step was studied by comparing the performance of three catalysts prepared via the same procedure but calcined at different heating rates. The results established that altering the heating rate could influence the structural properties of the cat...
[ 5 ] - Promoting effects of calcium on the performance of Cu-MgO catalyst in hydrogenation of furfuraldehyde
In the present study, the effects of calcium doping on the performance of the co-precipitated Cu-MgO catalysts prepared with different calcium loadings in the selective hydrogenation of furfuraldehyde were investigated. The results proved that the addition of this promoter had a remarkable impact on the catalytic performance. The conversion of furfuraldehyde enhanced up to 83% and the furfuryl ...
نویسندگان همکار