علی اصغر قریشی

کارشناس ارشد مهندسی شیمی، دانشگاه صنعتی نوشیروانی بابل

[ 1 ] - مدلسازی فرآیند ترکیبی هوادهی – تراوش گاز در پالایش آبهای آلوده به VOC

در این تحقیق مدلسازی فرآیند هیبرید هوادهی- تراوش بخار به منظور جداسازی ترکیبات آلی فرار از آب بررسی می شود. فرآیند هیبرید توانایی بازیابی VOC دفع شده را توسط فرآیند تراوش بخار فراهم می کند. یک مدل ریاضی براساس مقاومت های سری توصیف کننده انتقال جرم برای دو فرآیند می باشد. ارزیابی جداسازی در فاز خوراک و غشا در شرایط هیدرودینامیکی مشخص از خوراک و در یک ضخامت ثابت از غشا انجام شده است. آنالیز حساسی...

[ 2 ] - Fouling Mechanism Study of Nanoporous Membrane by Ultrafitration of Whey Proteins

One of the barriers during whey filtration using UF membrane is the fouling phenomenon of the membrane, which is caused by whey proteins. In this work, the UF membranes were prepared using polysufone (PSf), dimethyl formamide (DMF), 1 wt.% poly vinyl pyrrolidone (PVP) and different concentrations of LiCl via phase inversion induced by immersion precipitation. The prepared membranes were charact...

[ 3 ] - حذف آنیون کروم شش ظرفیتی از محلول‌های آبی با استفاده از ماده نانو حفره MCM-41 عامل‌دار شده با گروه آمینی

در این پژوهش به‌منظور حذف کروم از محلول‌های آبی ماده نانو حفره MCM-41 آمین دار شده با استفاده از روش پیوندزنی پس سنتزی به‌وسیله گروه 3-آمینوپروپیل تری‌متوکسی‌سیلان تولید شد. آنالیزهای پراش پرتو ایکس، جذب- واجذب گاز نیتروژن، وزن‌سنجی حرارتی و طیف‌سنجی عبوری مادون قرمز فوریر (FT-IR)، تشکیل ماده میان‌حفره با ساختار منظم و ...

[ 4 ] - Extraction of pectin from sour orange and its application as the adsorbent for removal of nickel from aqueous solution: Kinetic and equilibrium study

The present study investigates the potential applicability of the extracted pectin from sour orange pomace as adsorbent for Ni (II) removal from aqueous solution. Pectin extraction from the pomace was carried out using HCl and the highest pectin extraction yield of 26.75% was obtained. The Fourier transform infrared (FTIR) spectroscopy analysis confirmed that the structure of the extracted pect...

[ 5 ] - Optimization of solvothermally synthesized ZIF-67 metal organic framework and its application for Cr(VI) adsorption from aqueous solution

In this study, ZIF-67 was synthesized through solvothermal method to remove Cr(VI) ions from aqueous solution. To improve the structural properties of ZIF-67 and its adsorption capacity, optimization of the synthesis conditions was carried out based on maximum Cr(VI) uptake. From experiments, the optimum condition was revealed as solvent: metal ion molar ratio of 4.6:1, ligand: metal ion molar ...

[ 6 ] - Composite Multi Wall Carbon Nano Tube Polydimethylsiloxane Membrane Bioreactor for Enhanced Bioethanol Production from Broomcorn Seeds

Broomcorn seed (Sorghum vulgare) was used as raw material for bioethanol production. Optimum conditions were obtained from response surface method. Broomcorn seed flour (45 g/l) was treated by alkaline treatment and dual enzymatic hydrolysis (0.7 g/l of α- amylase and 0.42 g/l of amyloglucosidase). The hydrolyzed total sugar of 25.5 g/L was used in conventional bioethanol production (8.1 g/l) u...

[ 7 ] - Amine Based CO2 Absorption in Membrane Contactor Using Polyvinyl Pyrrolidone-modified Polysulfone Flat Sheet Membrane: Experimental Study and Mass Transfer Resistance Analysis

Membrane contactor using amine based absorbents is an efficient technology for CO2 separation from gaseous mixtures. A novel porous polysulfone (PSF) flat membrane was prepared via non-solvent phase inversion method. The PSF membrane was modified by adding polyvinyl pyrrolidone (PVP) to the dope solution. The fabricated membrane was used in the serpentine flow field contactor module for CO2 abs...

[ 8 ] - Adsorption of Phenolic Compounds onto the Activated Carbon Synthesized from Pulp and Paper Mill Sludge: Equilibrium Isotherm, Kinetics, Thermodynamics and Mechanism Studies

A new activated carbon was produced from pulp and paper mill sludge as a low cost precursor via chemical activation by zinc chloride. The activated carbon was successfully used for the adsorption of phenol and two of its derivatives, i.e. 2-chlorophenol and 4-nitrophenol from aqueous solutions. The characterization of the prepared activated carbon demonstrated high textural properties for the s...

[ 9 ] - Adsorption of Fe (II) from Aqueous Phase by Chitosan: Application of Physical Models and Artificial Neural Network for Prediction of Breakthrough

Removal of Fe (II) from aqueous media was investigated using chitosan as the adsorbent in both batch and continuous systems. Batch experiments were carried out at initial concentration range of 10-50 mg/L and temperature range of 20–40˚C. In batch experiments, maximum adsorption capacity of 28.7 mg/g and removal efficiency of 93% were obtained. Adsorption equilibrium data were well-fitted with ...

[ 10 ] - Enhanced Bioethanol Production in Batch Fermentation by Pervaporation Using a PDMS Membrane Bioreactor

The integration of batch fermentation and membrane-based pervaporation process in a membrane bioreactor (MBR) was studied to enhance bioethanol production compared to conventional batch fermentation operated at optimum condition. For this purpose, a laboratory-scale MBR system was designed and fabricated. Dense hydrophobic Polydimethylsiloxane (PDMS) membrane was used for pervaporation. For fer...

[ 11 ] - Recovery of Methyl Acetoacetate from Antibiotic Production Plant\'s Waste Streams (TECHNICAL NOTE)

Chemical recovery of methyl acetoacetate from the amoxicillin plant’s waste stream was investigated. In process of amoxicillin production for activation of amoxicillin molecule, hydrolysis takes place at final stage. As a result methyl acetoacetate is formed. Liquid-liquid extraction was employed for the recovery of methyl acetoacetate from the waste stream. Diluted alkaline solution was used a...