Erfan Kosari
Mechanical Engineering Department, University of California, Riverside, CA, USA
[ 1 ] - Drag coefficient and strouhal number analysis of a rectangular probe in a two-phase cross flow
In some case of laboratory and industrial applications, various kind of measurement instruments must be placed in a conduit, in which multiphase fluid flows. Vortex shedding for any immersed body in flow field is created with a frequency, which according to flow conditions such as flow rates, geometry of body, etc. may be constant or variable. Failure may happen, if this frequency is close to o...
[ 2 ] - Thermo-economic analysis and optimization of cogeneration systems by considering economic parameters fluctuations
A successful cogeneration system design project needs an estimation of the economical parameters of the project, including capital investment, costs of fuel, expenses in maintenance and operating, and the proper cost for the products. This study describes the economic consideration of the benchmark cogeneration systems, called CGAM system located in the United States. To evaluate the profitabil...
[ 3 ] - Experimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis
An experimental study has been carried out to characterize bubble formation, growth, and detachment mechanisms in a stagnant liquid column. Both bubble frequency and bubble detachment size were measured in different gas flow rates, injector diameters and orientations, submergence height, and liquid properties. Experiments were performed for air injection flow rate ranges between 200 mlph and 12...
نویسندگان همکار