This paper presents development of an algebraic grid generation algorithm applicable to Finite Volume Method for Computational Fluid Dynamics (CFD) calculation of variable pitch twin screw machines. It is based on the principles developed for the uniform pitch rotors with constant cross-section profile. The same algorithm could be also used for rotors with variable profile geometry. Performance...

Over the past two years the Australian biodiesel industry has faced difficult times causing large scale producers to drastically curtail production with some even ceasing operation. This turn of events has highlighted the advantages of small scale production, which are investigated in depth in a companion paper (de Boer and Bahri 2009a). For small scale production to be viable the transesterifi...

This research describes aerodynamic characteristics of small-scale wind turbine blade, called Archimedes spiral wind turbine blade. Numerical approaches on the prediction of aerodynamic performance of the blade have been conducted. Both steady and unsteady state numerical simulations using ANSYS CFX are performed on the several cases of rotating speeds. Large scale tip vortex is captured and gr...

In axial flow compressor, blade surface roughness is affected by many failure modes such as fouling, erosion, corrosion and foreign object damage. But with development of filter performance, particles with diameter larger than 2 μm cannot enter into compressor, so fouling is the most important influence factor which results in the variation of surface roughness. This study respectively discusse...

This work presents an analysis about microreactors of different geometries for the biodiesel synthesis. The microreactors were made by a polymeric substrate with the photolithography technique. Simulations were made using the computational fluid dynamics software ANSYS-CFX. They show the flow behavior through the microchannels. Experiments were performed to produce biodiesel, with syringe pumps...

Computational Fluid Dynamic (CFD) modeling of a continuous countercurrent hydrolysis process was performed using ANSYS-CFX. The liquid properties and flow behavior such as density, specific heats, dynamic viscosity, thermal conductivity, and thermal expansivity as well as water solubility of the hydrolysis components triglyceride, diglyceride, monoglyceride, free fatty acid, and glycerol were c...

In this work, optimisation of a brushless direct current (BLDC) generator design was undertaken by carrying out an electromagnetic and computational fluid dynamic study. The studies were carried out for different loadingoverloading conditions and angular speeds, keeping in consideration the required electrical and thermal parameters, firstly for the initial design and then for optimised designs...