The adsorption characteristics of methylene blue (MB) onto needles of Pinus sylvestris L., an unconventional bio-adsorbent, were investigated. Maximum removal of MB was found to occur at initial pH 5. Adsorption capacity increased from 84.46 to 99.73 mg/g with an increase in temperature from 20 to 45°C at 200 mg/L of initial MB concentration. Adsorption isotherms were modeled with the Langmuir,...

Adsorption of carbon dioxide in slit-shaped carbon micropores at 273 K has been studied by means of the grand canonical Monte Carlo (GCMC) simulations and the nonlocal density functional theory (NLDFT). Three molecular models of CO2 have been used. Long-run GCMC simulations were performed with the three-center model of Harris and Yung (J. Phys. Chem. 1995, 99, 12021). For NLDFT calculations, we...

In this paper, the adsorption of cerium on modified Mesoporous aluminosilicate (with Si/Al mole ratio of 10) was studied. The effects of pH, contact time, initial concentration of cerium on adsorption of cerium were investigated. The adsorption capacity was high in the pH range of 4-8 and decreases with decreasing of the pH value. The Langmuir and Freundlich isotherms were applied to represent ...

The adsorption of gases on microporous carbons is still poorly understood, partly because the structure of these carbons is not well known. Here, a model of microporous carbons based on fullerene-like fragments is used as the basis for a theoretical study of Ar adsorption on carbon. First, a simulation box was constructed, containing a plausible arrangement of carbon fragments. Next, using a ne...

Activated carbons obtained from cane sugar bagasse (ACB), African palm pit (ACP) and sawdust (ACS) were prepared through an impregnated with HNO3 and thermal treatment in an atmosphere in N2/steam water at 1173 K. Adsorption isotherms of N2 at 77 K and of CO2 at 273 K were determined for the activated carbons for which surface area and pore volume values were from 868 to 1100 mg and from 0.27 t...

The effects of a double polyelectrolyte adsorption of poly(allylamine hydrochloride) (PAH) and xylan (Xyl) on a recycled unbleached softwood kraft pulp were studied. The kinetics of PAH adsorption on this pulp was analyzed by building adsorption isotherms and by estimating the surface nitrogen adsorbed through the X-ray photoelectron spectroscopy (XPS) technique. It was found that at pH 7.5, 0....

The aim of this work was to obtain information about interactions between polyphenols and β-glucan through linear adsorption equilibrium models. Polyphenolic compounds can interact with various food ingredients such as carbohydrates, proteins and lipids and these interactions can affect polyphenol bioactivities. Interactions can be studied through the adsorption process at a constant temperatur...

Monte Carlo (MC) simulations have been carried out to study the adsorption on square and triangular lattices of particles with two bonding sites that, by decreasing temperature or increasing density, polymerize reversibly into chains with a discrete number of allowed directions and, at the same time, undergo a continuous isotropic-nematic (IN) transition. The process has been monitored by follo...

We present experimentally measured adsorption isotherms of CO2, H2, and N2 on a phenol-formaldehyde resin-based activated carbon, which had been previously synthesized for the separation of CO2 in a precombustion capture process. The single component adsorption isotherms were measured in a magnetic suspension balance at three different temperatures (298, 318, and 338 K) and over a large range o...

Determination of the adsorption properties of novel activated carbons is important to develop new air quality control technologies that can solve air quality problems in a more environmentally sustainable manner. Equilibrium adsorption capacities and heats of adsorption are important parameters for process analysis and design. Experimental adsorption isotherms were thus obtained for relevant or...