This paper describes a novel technique for joining similar and dissimilar metal foils, namely micro clinching with cutting by laser shock forming. A series of experiments were conducted to study the deformation behavior of single layer material, during which many important process parameters were determined. The process window of the 1060 pure aluminum foils and annealed copper foils produced b...

Arc thermal metal spray coating provides excellent corrosion, erosion and wear resistance to steel substrates. This paper incorporates some results of aluminum coating applied by this method on plain carbon steel. Thereafter, coated panels were exposed to an environment known to form stable corrosion products with aluminum. The coated panels were immersed in Society of Automotive Engineers (SAE...

Current address – Department of Industrial Engineering, University of Wisconsin-Milwaukee, Milwaukee, WI 53201 † Corresponding author – [email protected] Tel: (414) 229-3377 ABSTRACT Surface texture influences friction during sliding contact conditions. In the present investigation, the effect of surface texture of soft materials on friction during sliding against hard materials was studied usin...

Single point incremental forming is used for rapid prototyping of sheet metal parts. This forming technology was applied to the fabrication of thin shell micropyramids of aluminum, stainless steel, and titanium foils. A single point tool used had a tip radius of 0.1 mm or 0.01 mm. An ultrasonic spindle with axial vibration was implemented for improving the shape accuracy of micropyramids formed...

A new eddy-current system based on low-noise magnetoresistive sensors has been developed to detect cracks and corrosion in thick, multi-layer metal structures. The new instrument has detected narrow slots as short as 6.3 mm, in the lowest layer of a stack of three aluminum plates totaling 25 mm in thickness. These flaws were detected through 19 mm of overlying aluminum, in spite of the presence...

ÐThe e€ect of hydrogen on the interaction between dislocations and other elastic centers (impurity atoms and dislocations) in 310 S stainless steel and high-purity aluminum has been directly observed during deformation experiments in situ in an environmental cell transmission electron microscope. In 310 S stainless steel, the presence of hydrogen was observed to reduce the elastic interactions ...

‘THEUSE of heavy aluminum foil in our ashing procedure for PB1 (1), introduced 3 years ago, has proved extremely successful in preventing cross-contamination. A Temco double-door muffle furnace is used for which three steel buckets were made; small buckets, 4 in. wide, 6 in. long, and 6 in. deep, and one large bucket, 6 in. wide, 8 in. long, and 6 in. deep. A steel shovel was made to aid the te...

Electromagnetic tracking devices are used in many biomechanics applications. Previous studies have shown that metal located within the working field of direct current electromagnetic tracking devices produces significant errors. However, the effect of sampling rate on the errors produced in a metallic environment has never been studied. In this study, the accuracy of Ascension Technologies' Flo...

In this study, a plasma electrolytic oxidation (PEO) process was used to form titanium-aluminum oxide coating on aluminized steel. The present work was mainly to study the effects of treatment time of PEO process on properties of the titanium coating. A potentiodynamic polarization corrosion test was employed to investigate the corrosion resistance of the coating. The friction coefficient and w...