Using a unique, near-field microscopy technique, fringe patterns and nanoparticle motions are visualized immediately following a nanofluid droplet deposition on a glass substrate in which an air bubble is entrapped. The nanofluid consists of DI-water, 0.10% Aluminum Oxide nanoparticles with an average diameter of 50 nm, and 0.0005% yellow-green polystyrene fluorescent particles of 1 μm diameter...

The mechanisms of seeding and nucleation of Cu nanoclusters onto an ultrathin alumina template supported on Ni3Al(111) has been investigated by means of ab initio calculations. Single Cu ad-atom diffusion on the oxide film is effective at room temperature, allowing preferential occupation of the defective sites of the so-called "dot" structure, where the adsorption is much stronger than in the ...

An analysis is carried out to study the steady two-dimensional stagnation-point flow of a nanofluid over a stretching/shrinking sheet in its own plane. The stretching/shrinking velocity and the ambient fluid velocity are assumed to vary linearly with the distance from the stagnation point. The similarity equations are solved numerically for three types of nanoparticles, namely copper, alumina, ...

FePt nanoparticles (NPs) were assembled on aluminum oxide substrates, and their ferromagnetic properties were studied before and after thermal annealing. For the first time, phosph(on)ates were used as an adsorbate to form self-assembled monolayers (SAMs) on alumina to direct the assembly of NPs onto the surface. The Al(2)O(3) substrates were functionalized with aminobutylphosphonic acid (ABP) ...

the use of an inorganic phase in water-in-oil (w/o) microemulsion   has   received considerable attention recently for preparing metal oxide   nanoparticles. this is a technique, which allows preparation of ultrafine   metal oxide nanoparticles within the size range 40 to 80 nm. preparation of   nano zno and cr 2 o 3 studied, investigated in the inverse   microemulsion system. therefore the nuc...

Cathodic activation examined with reference to the cold fuslon developments (controversy). Historically cathodic activation has been used for plating preparation of p a s s i v e (o x i d e) s u r f a c e s e.g. nickel/chromium alloys, niobium and powdered metals. More recent results of work employing cathodic activation for preparing aluminum for plating will be presented e.g. process paramete...

In this work, polymer composite materials based on linear low-density polyethylene armored with nanoparticles of aluminum oxide were obtained. A variety concentrations has been proven to affect the physical and mechanical properties resulting composite. Mechanical parameters studied in static dynamical regimes as well temperature dependence dynamic behavior samples was examined. As a result, op...

Zinc oxide (ZnO) is a widely used commercial material that is finding use in wound healing applications due to its antimicrobial properties. Our study demonstrates a novel approach for coating ZnO with precise thickness control onto 20 nm and 100 nm pore diameter anodized aluminum oxide using atomic layer deposition (ALD). ZnO was deposited throughout the nanoporous structure of the anodized al...

Spectroscopic investigations reveal the presence of a fast quenching process in erbium-doped aluminum oxide waveguides. We quantify the percentage of quenched ions and make predictions about the amplifier performance. Optical amplifiers; integrated optics materials; fast quenching processes; aluminum oxide

Anodizing is an electrochemical process that converts the metal surface into a decorative, durable, corrosion-resistant, anodic oxide finish. Aluminum is ideally suited to anodizing, although other nonferrous metals, such as magnesium and titanium, also can be anodized. The anodic oxide structure originates from the aluminum substrate and is composed entirely of aluminum oxide. This aluminum ox...