In this paper are presented desing, testing and numerical analysis for two manufactured control valve trims. Valve trim is consisted of cage or dick stack, plug, stem seat. Size from app. 15.88 mm (0.625 in) up to 101.6 (4 suitable 3D metal plastic print, what in paper. Selective laser melting printing applied on the disc Even better material properties rest parts could be obtained. This great ...

This paper presents the numerical and experimental investigation of a straight core annular diffuser normally used in marine gas turbine combustor. The flow in the annular diffuser has been simulated by solving the equations for conservation of mass and momentum. For turbulence modeling the standard k-ε model is employed and the predicted results have been validated with experiments. A five-hol...

The effect of tube diameter on two-phase flow patterns was investigated in circular tubes with inner diameters of 0.6, 1.2, 1.7, 2.6, and 3.4mm using air and water. The gas and liquid superficial velocity ranges were 0.01–50 and 0.01–3m/s, respectively. The gas and liquid flow rates were measured and the two-phase flow pattern images were recorded using high-speed CMOS camera. The flow patterns...

The current paper studies the influence of annular seal flow on the transient response of centrifugal pump rotors during the start-up period. A single rotor system and three states of annular seal flow were modeled. These models were solved using numerical integration and finite difference methods. A fluid-structure interaction method was developed. In each time step one of the three annular se...

A lthough the incidence of mitral stenosis has declined precipitously in the Western world due to the reduced incidence of rheumatic heart disease, mitral regurgitation remains one of the most common valvular pathologies. Many patients affected by severe mitral valve disease are elderly with multiple comorbidities and are at high risk for traditional open surgical mitral valve repair or replace...

Although bicuspid aortic valve occurs in an estimated 1% of adults and mitral valve prolapse in an estimated 5% of adults, occurrence of the 2 in the same patient is infrequent. During examination of operatively excised aortic and mitral valves because of dysfunction (stenosis and/or regurgitation), we encountered 16 patients who had congenitally bicuspid aortic valves associated with various t...

We designed and fabricated a novel microfluidic device that can be operated through simple finger squeezing. On-chip microfluidic flow control is enabled through an optimized network of check-valves and squeeze-pumps. The sophisticated flow system can be easily constructed by combining a few key elements. We implemented this device to perform quantitative biochemical assays with no requirement ...

This paper gives an overview of elastomeric valve- and droplet-based microfluidic systems designed to minimize the need of external pressure to control fluid flow. This Concept article introduces the working principle of representative components in these devices along with relevant biochemical applications. This is followed by providing a perspective on the roles of different microfluidic valv...

Abstract Severe service control valves or better, high-pressure reducing can see inlet pressures in excess of 4000 psi. Such are found industries ranging from gas petroleum wells, to chemical plants and steam-producing power (Goodwin, “Specifying Control Valves for Service Conditions”, INTECH FOCUS, November (2022), p. 20). convert high levels kinetic energy through a process conversion sound-p...