Coal is a major source of energy. The available Indian coal quality is very poor having very high ash content and low calorific value. Indian coal generates a large quantity of ash as a by-product of combustion. The objectives of the present study were to reduce the ash content of coal to produce ultra-clean coal. The coal was treated wi...

The ash of C. polygonoides (locally called balanza) was collected from Lakki Marwat, Khyber Pakhtunkhwa, Pakistan, and was utilized as biosorbent for methylene blue (MB) removal from aqueous solution. The ash was used as biosorbent without any physical or chemical treatment. The biosorbent was characterized by using various techniques such as Fourier transform infrared spectroscopy (FTIR), ther...

Two common tree species, ash ( Fraxinus sp.) and oak Quercus sp.), could provide readily available media for denitrifying bioreactors that use wood-based carbon biological nitrate treatment. However, it is not known if the wood from Emerald Ash Borer-killed (EAB-killed) trees an effective source removal compared to other species or high-tannin nature of inhibits denitrification potential. This ...

The removal of Cd2+, Zn2+ and Ni2+ by coal bottom ash has been investigated. In single metal system, metal uptake was studied in batch adsorption experiments as a function of pH (2–3), contact time (5–180 min), initial metal concentration (50–400 mg/L), adsorbent concentration (5–40 g/L), particle size, and ionic strength (0–1 M NaCl). Removal percentages of metals ions increased with increasin...

Removal of cadmium from aqueous solution was studied; using platanus orientalis leaves (POL) and their ash in 2006 in Iran. Bach adsorption experiments were performed as a function of solute concentration, contact time, pH and ironic strength for the experiment. The effect of Ca , Mg , Na and K on adsorption was 2+ 2+ + then examined. The effect of this adsorbent on COD in aqueous solution show...

The sintering flue gas samples were collected at the inlets and outlets of the desulfurization systems to evaluate the influence of the systems on PCNs emission concentrations, profiles, and emission factors. The PCNs concentrations at the inlets and outlets were 27888-153672 pg m(-3) and 11988-42245 pg m(-3),respectively. Desulfurization systems showed excellent removal for PCNs, and the remov...

Corn processing streams are characterized by high water content. Removal of water and recovery of solids are major economic and logistical challenges. New technologies are needed to modify processing streams and to reduce variability and improve quality of coproducts. The objective was to determine the effectiveness of microfiltration and ultrafiltration systems in altering water, solids (prote...

Chlorophenols are one of the most important groups of priority pollutants, due to their high toxicity, mutagenicity and carcinogenicity. Although activated carbon has been the preferred choice for the removal of such pollutants from wastewaters, the search for cheaper alternative sorbents became common in the last years. Fly ash, a by-product from coal burning power plants, has a surface compos...

Landfill leachate is an important pollution factor resulting from municipal landfill sites. Physical and chemical processes are the better option for pretreatment or full treatment of landfill leachate. This article presents a combination of pre-treatment method (coagulation and adsorption) for leachate collected from municipal solid waste open dumping site. Physico chemical characteristics of ...

INTRODUCTION The use of satellite techniques provides valuable information for mapping ash hazards, as well as the means to study and predict the fates of volcanic clouds. We have used ultraviolet (TOMS – Total Ozone Mapping Spectrometer) and infrared (e.g., AVHRR – Advanced Very High Resolution Radiometer; HIRS2 – High Resolution Infrared Radiation Sounder/2; GOES – Geostationary Operational E...