Preliminary note 3D numerical study of transient heat transfer phenomenon on a solid plate with complex heat sources has been carried out. In order to validate the chosen numerical model, a set of thermographic measurements have been performed on a heating plate sample. The infrared camera provided a number of thermograms showing the development of transient temperature fields on the plate surf...

The paper shall demonstrate how concentrated source terms can be included by Delta functions in models with distributed parameters and, moreover, that the abstraction of sharply concentrated quantities leads to decisive numeric advantages. The system of differential equations loses its stiffness here at the method of lines. The eigenvalues of the Jacobian matrix (A-matrix) show that it becomes ...

We assessed the roles of the pulmonary and bronchial circulations as potential heat sources to the pulmonary airways during respiratory heat loss, by observing the changes in airstream temperature that accompanied temporary occlusion of the pulmonary or bronchial circulations. Baseline end-expiratory and end-inspiratory airstream temperatures were 35.4 +/- 0.2 degrees C (SEM) and 30.9 +/- 0.3 d...

The effect of thermal and solutal buoyancy induced by a discrete source of heat and mass transfer in a square duct under the influence of magnetic field, especially at the turbulent regime for the first time is reported. Al2O3/water nanofluid is used with constant heat flux from three discrete heat sources. In the present study, the effects of Reynolds number (100 to 3000), particle volume frac...

Aim of this project is the development of a new heat pump system with economizing that is able to improve the heating performance using two or more heat sources at different temperature levels. These heat sources are incorporated into the system with minimal loss of exergy by adding the heat at different pressure levels. Practical applications for such systems are for example buildings with a h...

in this paper, a three-dimensional finite element model has been developed to simulate the laser-tig hybrid welding (hlaw) of stainless steel 1.4418 with thickness of 4 mm. transient temperature profile and dimensions of the fusion zone and heat affected zone (haz) during welding process are calculatedusing finite element method (fem) and were solved in the abaqus/standard software.the heat sou...