The importance of renewable energy sources for the electrical power supply has grown rapidly in the past decades. Their often unpredictable nature however poses a threat to the stability of the existing electric grid. Hydroelectric powerplants play an important role in regulating the integration of renewable energy sources into the network by supplying on-demand load balancing as well as primar...

OBJECTIVE Femoral arterial cannulation is associated with a significant risk of lower limb ischemia. The aim of the study was to assess the pressure and flow in the femoral artery using a novel bidirectional femoral cannula in a sheep model of peripheral cardiopulmonary bypass. METHODS Peripheral cardiopulmonary bypass was established using a multistage venous cannula inserted into the intern...

In this paper, the non-reacting flow in a swirl burner is studied using large eddy simulation. The configuration consists of two unconfined coannular jets at a Reynolds number of 81,500. The flow is characterized by a Swirl number of 0.93. Two cases are studied in the paper differing with respect to the axial location of the inner pilot jet. It was observed in a companion experiment (Bender and...

One of the drawbacks of hybrid rocket motors is the limited regression rate of the fuel grain, which impacts on the scalablility of the type. A number of methods of increasing this have been proposed and successfully tested, in particular the use of swirling oxidiser flow to create turbulence and increase the local oxidiser mass flux. However, many of these have limitations in practical motors ...

The present work considers the turbulent air flow inside an annular high speed rotor-stator cavity opened to the atmosphere at the periphery. The interdisk-spacing is sufficiently large so that the boundary layers developed on each disk are separated and the flow belongs to the regime IV of Daily and Nece (1960). In such a system, the solid body rotation of the core predicted by Batchelor in ca...

This thesis is motivated by the necessity to understand the flow structure of turbulent flows in bends encountered in many technical applications such as heat exchangers, nuclear reactors and internal combustion engines. Flows in bends are characterised by strong secondary motions in terms of counter-rotating vortices (Dean cells) set up by a centrifugal instability. Specifically the thesis dea...

The problem emerging from particle coating is how to manufacture particles with just enough material deposited to achive the desired result [1]. Especially in case of functional coatings, the uniformity of coating thickness over the entire particle surface plays an important role. In our study the performance of two bottom spray coaters and the effect of the particle motion on the coating unifo...