This thesis consists of uncertainty and techno-economic studies of two different biofuels production pathways (catalytic pyrolysis and gasification). The objective of this paper is to obtain a side-by-side techno-economic comparison of in situ and ex situ catalytic pyrolysis, and gasification state-of-technology and target scenarios that addresses both sensitivity and uncertainty analysis in th...

Biomass has a very high potential as a renewable energy resource because of its reliability and availability everywhere around the globe. It is the fourth highest primary energy resource in the world after oil, coal, and gas, contributing about 10.6% of the global primary energy supply. Many studies suggest that biomass can become an important primary energy source in the future global energy s...

Producing clean hydrogen from renewable resources will reduce our dependence on using fossil fuels towards a green and sustainable future. Biomass gasification is regarded as a promising technology for hydrogen production. In this work, low cost Ni-based catalyst was applied in a two-stage fixed bed reaction system. Fe was added into Ni-Al catalyst(80mol.% Al) by co-precipitation method with va...

Application of excessive animal manure to the land may cause some environmental problems such as eutrophication of surface waters, degradation of ground water quality, and threats to human health. This paper reports an experimental study on the technology of biomass gasification to treat animal waste by analysing the effects of key operating parameters on gasification. In this research, dairy m...

Tar formation is the main bottleneck for biomass gasification technology. A novel rotary kiln type biomass gasification process was proposed. The concept design was based on air staging and process separation. This concept was demonstrated on a pilot scale rotary kiln reactor under ambient pressure and autothermic conditions. The pilot scale gasifier was divided into three different reaction re...

The non-isothermal thermogravimetric method (TGA) was applied to a bituminous coal (PT), two types of biomass, chestnut residues (CH) and olive stones (OS), and coalbiomass blends in order to investigate their thermal reactivity under steam. Fuel chars were obtained by pyrolysis in a fixed-bed reactor at a final temperature of 1373 K for 30 min. The gasification tests were carried out by thermo...

BACKGROUND Bio-jet fuels compatible with current aviation infrastructure are needed as an alternative to petroleum-based jet fuel to lower greenhouse gas emissions and reduce dependence on fossil fuels. Cradle to grave life cycle analysis is used to investigate the global warming potential and fossil fuel use of converting poplar biomass to drop-in bio-jet fuel via a novel bioconversion platfor...

The gasification of biomass is a promising technique to generate different forms of valuable alternative energy, including direct thermal energy and further conversion of synthesis gas to clean liquid fuels or chemicals via Fischer– Tropsch synthesis (FTS) [1–5]. The ideal H2/CO ratio for FTS is ~2/1 based on the stoichiometry. However, The H2/ CO for the synthesis gas obtained from biomass gas...

This study is focused on the effects of nitrogen content in biomass feedstock on the producer gas composition and the flue gas NOx emissions from a pilot-scale gasification and combustion system. Biomass gasification has the potential to produce carbon negative energy by using renewable resources. The greenhouse gases emitted by burning fossil fuels have to be reduced, and biomass gasification ...

Biomass gasification is one of the alternatives to producing liquid fuels and chemicals from biomass residues. The gas produced in gasification contains CO, H2, H2O, CO2, light hydrocarbons and tars. Depending on the gasifier type, operating conditions and fuel, the light hydrocarbons can contain as much as 50 % of the total energy contents in the gas. The gas also contains catalyst poisons suc...