This two-part study concerns the development of a generalized approach to predicting both Nucleate Boiling dominated and Convective Boiling dominated heat transfer in mini/micro-channel flows. Both heat transfer regimes exhibit substantial reduction in the heat transfer coefficient at the location of partial annular liquid film dryout, hence the need to ascertain the occurrence of this importan...

Liquid agent transport was investigated around unheated and heated horizontal cylinders (to a near-surface temperature of approximately 423 K, i.e., well above the water boiling point) under ambient conditions. Experimental results are presented for a well-characterized, droplet-laden homogenous turbulent flow field, using water, methoxy-nonafluorobutane (i.e., HFE-7100, C4F9OCH3, with a boilin...

Flow boiling in microchannels has received considerable attention from researchers worldwide in the last decade. A scaling analysis is presented to identify the relative effects of different forces on the boiling process at microscale. Based on this scaling analysis, the flow pattern transitions and stability for flow boiling of water and FC-77 are evaluated. From the insight gained through the...

This paper reviews the previous work carried on pool boiling heat transfer during heating of various liquids and commodities categorized as refrigerants and dielectric fluids, pure liquids, nanofluids, hydrocarbons and additive mixtures, as well as natural and synthetic colloidal solutions. Nucleate pool boiling is an efficient and effective method of boiling because high heat fluxes are possib...

Boiling crisis is a transition between nucleate and film boiling. It occurs at a threshold value of the heat flux from the heater called CHF (critical heat flux). Usually, boiling crisis studies are hindered by the high CHF and short transition duration (below 1 ms). Here we report on experiments in hydrogen near its liquid-vapor critical point, in which the CHF is low and the dynamics slow eno...

An easy-to-implement technique for pool boiling heat transfer enhancement is proposed and evaluated through an experimental investigation. This free-particle technique brings about nucleate boiling at a low degree of superheat by means of metal particles that are not fixed to the heated surface, but rather are free to move with respect to the surface. The effects of copper particles with sizes ...

Heat transfer with liquid–vapor phase change in microchannels can support very high heat fluxes for use in applications such as the thermal management of high-performance electronics. However, the effects of channel cross-sectional dimensions on the two-phase heat transfer coefficient and pressure drop have not been investigated extensively. In the present work, experiments are conducted to inv...

Boiling heat transfer rates impact the performance of various processes like quenching, steam generation, desalination, and boiling water reactors. The film boiling regime of the boiling curve has very low heat transfer rates around the Leidenfrost point which corresponds to the formation of a stable and continuous vapor layer at the solid-liquid interface (Leidenfrost effect). This insulating ...

This study aimed to investigate the influence of flash-boiling conditions on liquid propane sprays formed by a multi-hole injector at various injection pressures. The focus was spray structures, which were analysed qualitatively and quantitatively means spray-tip penetration global angle. effect flash boiling evaluated in terms trends observed for subcooled conditions. Propane injected commerci...