IIn this paper, a tunable single-amplifier biquadratic lowpass filter is presented. It consists of one balanced low-gain current amplifier and a second-order MOSFET-C feedback network. The filter was integrated in a double-poly 0.6 pm CMOS process and operates from a 3.3 V power supply. The pole frequency is tunable from 15.2 to 17.2 MHz, the pole Q is 3, the spurious-free dynamic range is at l...

A two stage sub-µW Inverter-based switched-capacitor amplifier-filter is presented which is capable of amplifying both spikes and local field potentials (LFP) signals. Here we employ a switched capacitor technique for frequency tuning and reducing of 1/f noise of two stages. The reduction of power consumption is very necessary for neural recording devices however, in switched capacitor (SC) cir...

A dynamic bias technology is proposed to meet linearity standards at high-power levels and simultaneously reduce power consumption at low-power output levels for a mobile WiMAX terminal application. The dynamic bias circuit induces voltage via the current from the source port of the final active stage, and makes the bias operate the PA dynamically as the output power level is increased. The fab...

The objective of this research was to design a 2.4 GHz class AB Power Amplifier (PA), with 0.18um Semiconductor Manufacturing International Corporation (SMIC) CMOS technology by using Cadence software, for health care applications. The ultimate goal for such application is to minimize the trade-offs between performance and cost, and between performance and low power consumption design. This pap...

this paper proposes a low voltage (±0.55v supply voltage) low power (44.65µw) high common mode rejection ratio (cmrr) differential amplifier (d.a.) with rail to rail input common mode range (icmr), constant transconductance (gm) and enhanced frequency performance. its high performance is obtained using a simple negative averaging method so that it cancels out the common mode input signals at th...

The very fast growing market of portable equipment is increasing interest in low power integrates circuit. So, designing low power integrated circuits requires reduction of supply voltages and interconnection parasitic to minimum but reduction in supply voltage implies series of problems in circuit design. To overcome these issues, an Ultra low power low voltage two stage class AB CMOS fully di...

The objective of this research was to design a 2.4 GHz class AB Power Amplifier (PA), with 0.18um Semiconductor Manufacturing International Corporation (SMIC) CMOS technology by using Cadence software, for health care applications. The ultimate goal for such application is to minimize the trade-offs between performance and cost, and between performance and low power consumption design. This pap...

In this review article, a stage-convertible RF power amplifier designed with a 0.18-m RF CMOS process is described. A method to implement a low-power matching network is an essential technology for the stage-convertible power amplifier. Various low-power matching networks with distributed active transformers as an output power combiner are compared in terms of the amounts of undesired coupling...

Sense amplifiers are one of the most vital circuits in the margin of CMOS memories. Their performance influences both memory access time and overall memory power dissipation. The existing Current-Mode Sense Amplifier coupled with a simplified read-cycle-only memory system has the ability to quickly amplify a small differential signal on the Bit-Lines (BLs) and Data-Lines (DLs) to the full CMOS ...

--This paper describes the design and analysis of High gain and widest bandwidth operational amplifier for Analog to Digital conversion application. Different Techniques are used to enhance the output characteristics performance. These amplifiers demonstrate the highest frequency and widest bandwidth of operation for amplifier using reduced complexity algorithm. This paper presents an improved ...