The matrix converter system is competitive solution to replace the conventional two stage ac to ac converter. In this paper, a matrix converter driving a speed-controlled induction machine is examined under open-switch fault. First, a-predictive direct torque method is proposed using only the motor torque and current. Second, a motor speed control is presented. The proposed techniques do not re...

DTC is strategy of selecting proper stator voltage vectors to reduce torque error and flux error. DTC uses hysteresis band controller whose control action has no difference between large torque error and small one. This results in high torque ripple. In order to reduce the torque ripple and to improve the performance of DTC, DTC based on Fuzzy Logic is proposed in this paper. The simulations ar...

Abstract – In direct torque control, the selection of an applied voltage vector is based on the measured parameters at the beginning of the sampling period. The delay between the measurement and the application of the voltage vector is the origin of an extra torque ripple. In this paper, a new predictive controller is proposed for compensating this delay and reducing the torque ripple. The stat...

Switched reluctance machines (SRMs) have received increasing attention for their many potential uses, such as wind power and electric vehicle (EV) drive systems. The Quasi-Z-source Integrated Multiport Converter (QZIMPC) was recently introduced to improve the reliability of SRM driver through small capacitance values. It is not possible, however, simultaneously energize deenergize two phases in...

This paper proposes a novel permanent magnet (PM) motor for high torque performance, in which hybrid PM material and asymmetric rotor design are applied. The hybrid PM material is adopted to reduce the consumption of rare-earth PM because ferrite PM is assisted to enhance the torque production. Meanwhile, the rotor structure is designed to be asymmetric by shifting the surface-insert PM (SPM), ...

Major constraints while using motor drive system are efficiency and cost. Commutation in the conventional DC motors is carried out by commutator which is rotating part placed on the rotor and brushes. Due to these mechanical parts, conventional DC motor consist high amount of losses. Brushless DC (BLDC) Motors are very extensively used motors these days because of its advantages over convention...

In this paper, we present a semi-analytical model for determining the magnetic and electromagnetic characteristics of spoke-type permanent magnet (STPM) machine considering magnet segmentation and finite soft-material relative permeability. The proposed model is based on the resolution of the Laplace’s and Poisson’s equations in a Cartesian pseudo-coordinate system with respect to the relative ...

The main problem in improving the tracking performance of linear synchronous motors is the presence of force ripple caused by the irregular magnetic field of the permanent magnets and inaccuracy in electronic commutation by the servo amplifier. In this paper a method to compensate the force ripple based on shaping of the phase current waveforms is presented. The method generates optimized curre...

This Paper presents the Phase Disposition Scheme, which is topology independent. This scheme is used in Multilevel Inverters, interleaved parallel combination. Analysis on the other scheme which is Phase Opposition Disposition has also been performed. The best strategies related to the paralleling of inverters are evaluated, particularly those associated to current balancing between commutation...

The basic concept of direct torque control of induction machines is investigated in order to emphasize the effects produced by a given voltage vector on stator flux and torque variations. The low number of voltage vectors which can be applied to the machine using the basic DTC scheme may cause undesired torque and current ripple. An improvement DTC schemes proposed in the research literature is...