The switched reluctance motors had gained more attention among the variable speed drives due to its inherent simplicity and low cost. It is an electronically commutated motor and need to be driven from a converter. The excitation of the different phases of the converter is dependent on the rotor position. This paper presents the simulation of the open loop control of a 6/4 switched reluctance m...

The controller is used to improve the dynamic performance of DC-DC converter by achieving a robust output voltage against load disturbances. This paper presents the performance of PI and Fuzzy controller for a phaseshifted zerovoltage switched full-bridge PWM (ZVS FBPWM) converters with a closed loop control. The proposed converter is regulated with minimum overshoot and good stability. In this...

In this paper, based on the similarity, in structure and principle, between a grid-connected converter for a direct-driven permanent magnet synchronous generator (D-PMSG) and an active power filter (APF), a new D-PMSG-based wind turbine (WT) system configuration that includes not only an auxiliary converter in parallel with the grid-side converter, but also a coordinated control strategy, is pr...

This paper investigates a novel single stage AC–AC power conversion, as an alternative to multistage AC– DC–AC power conversion topology, for interfacing the wind energy conversion system (WECS) to a grid as a distributed load system. A comprehensive dynamic model of proposed AC–AC converter is developed to satisfy all the functions of the converter. A new time switching pattern and a control m...

This paper presents performance evaluation of an asymmetrical parameter type two-phase induction machine drive using two-phase three-leg voltage source converter (VSC) operating in motoring and generating modes. A system is simulated using MATLAB/SIMULINK. The proposed converter system includes a machine side converter using a three-leg VSC and a front end converter using a single-phase full br...

This application note describes the LED driving system using a half-bridge LLC resonant converter for high power LED lighting applications, such as outdoor or street lighting. Due to the existence of the non-isolation DC-DC converter to control the LED current and the light intensity, the conventional PWM DC-DC converter has the problem of low-power conversion efficiency. The halfbridge LLC con...

This paper presents development of an optimal control strategy for a hybrid photovoltaic/battery energy storage (PV/BES) system. The fluctuations at the DC bus voltage due to voltage sag were mitigated by using charge/discharge capability of the BES through the DC/DC buck/boost converter. Furthermore, an optimization of system control parameters responsible for DC bus voltage regulation within ...

This application note describes the LED driving system using a half-bridge LLC resonant converter for high power LED lighting applications, such as outdoor or street lighting. Due to the existence of the non-isolation DC-DC converter to control the LED current and the light intensity, the conventional PWM DC-DC converter has the problem of low-power conversion efficiency. The halfbridge LLC con...

In order to meet increasing power demand, taking into account economical and environmental factors, wind energy conversion is gradually gaining interest as a suitable source of renewable energy. In this paper, The modeling of the Wind Energy Conversion System (WECS) with Matrix converter i s p r o p o s e d . The matrix converter, as a power electronic converter, is used to interface the induct...

-The simulation of a nonlinear controller with power sharing control capabilities for a wind energy system double input buck boost–buck boost converter is presented. A multiple-input DC–DC converter is useful to obtain the regulated output voltage from input power source such as a wind array. Double input DC-DC buck boost converter principle of operation and the equations describing the convert...