3. 17th European Society for Biomaterials Conference, Barcelona 2002 ”Protein adsorption on spark anodized Titanium” P. Becker, A. Baumann, U. Beck, A. Kirbs, J. Rychly, F. Lüthen, H-G. Neumann 4. Ti 2003, Science and Technology, Vol. V, Proceedings of the 10th World Conference on Titanium, Hamburg 2003; (ed. G. Lütjering, J. Albrecht), 3339-3344 "Spark Anodization on Titanium and Titanium Allo...

In this study, the concept of "twinning induced plasticity (TWIP) alloys" is broadened, and the underlying intrinsic microscopic mechanisms of the general TWIP effect are intensively explored. For the first aspect, "TWIP copper alloys" was proposed following the concept of "TWIP steels", as they share essentially the same strengthening and toughening mechanisms. For the second aspect, three int...

Nanowires with 5 nm diameter made of silver, copper, and their alloys were grown in superfluid helium. The silver nanowires being heated to 300 K disintegrated into individual clusters. In contrast, copper nanowires were stable at room temperature, and nanowires made of alloys were also stable despite their low melting temperature.

Interaction between 5 lm thick copper and 50 nm thin titanium films was investigated as a function of annealing temperature and time using MeV He Rutherford backscattering, X-ray diffraction and dynamic Secondary Ion Mass Spectrometry. Samples were made by depositing 10 nm of titanium on a PECVD silicon oxynitride, followed by 50 nm of titanium nitride and 50 nm of titanium in the said order. I...

a complexometric method for the determination of titanium in the presence of other metal ions based on the selective masking ability of 5-sulphosalicylic acid towards titanium is described. titanium (iv) present in a given sample solution is complexed with a known excess of edta and surplus edta is titrated against zinc sulphate solution at ph 5-6 using xylenol orange as the indicator. a known ...

INTRODUCTION Treatment of osteoporotic fractures is still challenging and an urgent need exists for new materials, better adapted to osteoporotic bone by adjusted Young's modulus, appropriate surface modification and pharmaceuticals. MATERIALS AND METHODS Titanium-40-niobium alloys, mechanically ground or additionally etched and titanium-6-aluminium-4-vanadium were analyzed in combination wit...

The effect of Cu on the localized corrosion of Ni-Cr-Mo alloys has been investigated in hot saline solutions by comparing the behavior of N06059 and N06200 alloys, using electrochemical and surface analytical techniques. No measurable effect of copper on anodic film growth kinetics and passive film properties was detected and the breakdown and repassivation potentials of the alloys were very si...

Titanium-silicon alloys have been electrochemically extracted from the multi-component titanium compounds in molten calcium chloride electrolyte. Sintered pressed pellets of titanium-bearing compounds served as the cathode, and the electrochemical experiments were systematically carried out at 900 °C, 3.1 V and 1000 °C, 3.8 V using a graphite-based anode and an improved inert-oxygen-ion-conduct...