Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly used for many industrial applications due to their good mechanical properties and corrosion resistance in acidic, caustic and marine environments. However, DSSs are susceptible to intergranular, pitting and stress corrosion in corrosive environments due to the formation of secondary phases. Such phases are...

Corrosion surface damage in the form of pitting and micro-cracks is observed in many metals. Cracks usually initiate from the pits and grow under cyclic stresses and eventually lead to material failure. An image analysis based on wavelet transforms and fractals was used to study the corrosion morphology of nickel aluminum bronze metal under varying corrosion conditions and applied stresses. Ima...

The applications of Bismuth Titanate (BixTiyOz) materials have been focused on their electronic and optical properties, but with respect to the use of these compounds in applications like corrosion resistance, have been very few or nonexistent. For this reason, in the present investigation BixTiyOz thin films were deposited using RF magnetron sputtering onto silicon wafers, stainless steel 316L...

Our research on employing the cellular automata methodology to corrosion and passivation phenomena is reviewed. Examples of a peculiar pit development are found and presented. The diffusion rate in the corroding medium is argued and shown in the simulation results to affect mainly the characteristic length scale for the corrosion process. New data for the pitting corrosion development on a plan...

In spite of the excellent resistance of stainless steel (SS) towards uniform corrosion, overcoming various localized corrosion could be a real challenge. This work presents an analysis of the failure behavior of 316L SS air chiller tube with a peripheral crack used in a Qatari gas company in Qatar. Macroscopic failure characteristics were analyzed by means of visual inspection, digital imaging ...

The contribution of bacteria to the corrosion mass loss and to pitting of mild steel was observed over 2.5 years using parallel streams of unpolluted natural (biotic) and nominally sterilized (abiotic) Pacific Ocean coastal seawater. As also observed by others, in artificial laboratory exposures, corrosion mass loss within the first few days of exposure was much greater in the biotic stream. Ho...

The structure of a titanium nitride film coated by arc ion plating on a Ni-50Ti shape memory alloy was characterized by X-ray photoelectron spectroscopy (XPS). The corrosion behavior of the titanium nitride-coated Ni-50Ti alloy was examined in 0.9% NaCl solution by potentiodynamic polarization measurements and a polarization resistance method. XPS spectra showed that the titanium nitride film c...

causes many failures in chemical process installations. These failures generate high costs, therefore an effective corrosion monitoring system obtrudes. This paper focuses on the classification of the most important corrosion processes: pitting, stress corrosion cracking (SCC) and general corrosion. The computations and algorithms involved in the classification of the corrosion time series are ...

Numerical simulation based on finite element method is conducted to predict the location of pitting corrosion in reinforced concrete. Simulation results show that it is feasible to predict corrosion monitoring based on ultrasonic guided wave in reinforced concrete, and wavelet analysis can be used for the extremely weak signal of guided waves due to energy leaking into concrete. The characteris...