Complex numerical models and simulations from the microscale to the macroscale have been developed for the corrosion of aluminium (Al) alloys typically used for aircraft construction, such as AA2024. The main motivation for developing the corrosion models and simulations is to make significant technical advancements in the fields of aircraft design (using current and new materials), surface pro...

Tarnish and Corrosion behavior of three Commercial dental amalgams namely Am.1, Am.2, Am.3, have been investigated by utilizing in vitro tests. The corrosion and/or dissolution rate of the three dental amalgams were studied in 0.9 wt% NaCl Solution, artificial saliva and Ringer's solution. Potentiodynamic polarization technique was employed to study cathodic and anodic polarization behavior, fr...

To avoid the secondary pollution that inorganic corrosion inhibitor may cause in circulating cooling water, the bio-corrosion inhibition effect of lysozyme, catalase, lipase, and laccase, as the biologic inhibitors without the above problem, and the increased bio-corrosion inhibition effect of Ca+2 and Mg+2 are studied. An enzyme with corrosion properties was selected by rotary coupon test. The...

The corrosion behavior of mild steel in the presence of acetic acid (CH3COOH) and carbon dioxide (CO2) has been investigated using electrochemical techniques and weight-loss measurements. Electrochemical measurements have shown that the presence of acetic acid affects predominantly the cathodic reaction. The acetic acid effect is much more pronounced at elevated temperatures when catastrophic c...

One of the most frequently corrosion type is the atmospheric corrosion. Carbon steel behavior at atmospheric corrosion is presented on base of the literature data study. This has been reported to account for more failures in terms of cost and tonnage than any other type. About 80% from all degradations produced by corrosion in the metallic constructions are due to the atmospheric corrosion. The...

The corrosion inhibition properties of the benzothiazole BTH and benzotriazole BT inhibitors on the aluminum in 0.25 M HCl solution were studied. Electrochemical impedance spectroscopy EIS, electrochemical noise EN and potentiodynamic polarization techniques were used to investigate the inhibition properties of the inhibitors. Scanning electron microscope SEM was also utilized in order to inves...

Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with Al-Si alloy powder to improve corrosion resistance. Characterization by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) analysis revealed that intermetallic compounds (IMCs) of Mg2Si, Al12Mg17 and Al3Mg2 were formed in the matrix of α-Mg and Al solid solutions...

THE GALVANIC CELL The major corrosion concern in the water works industry is “galvanic” corrosion. Galvanic corrosion takes place due to current flow in a “galvanic cell” which is defined as (1) two dissimilar metals, an anode and a cathode, (2) in electrical contact with each other and (3) a common electrolyte. A galvanic cell is produced when the pipeline components come in contact with the s...

Our research on employing the cellular automata methodology to corrosion and passivation phenomena is reviewed. Examples of a peculiar pit development are found and presented. The diffusion rate in the corroding medium is argued and shown in the simulation results to affect mainly the characteristic length scale for the corrosion process. New data for the pitting corrosion development on a plan...

The roles of the alloying elements Mo, Cr, and W in resisting crevice corrosion of UNS N06022, UNS N06625, and UNS N10362 have been studied under galvanostatic conditions in 5 mol/L NaCl at 150°C. Corrosion damage patterns were investigated using surface analytical techniques such as scanning electron microscopy and optical imaging, and the corrosion products characterized by energy dispersive ...