In this study, the composite material with composition of MgH2-5 wt% SiC has been prepared by co-milling of MgH2 with SiC powder. The effect of milling time and additive on MgH2 structure, i.e. crystallite size, lattice strain, particle size and specific surface area, and also hydrogen desorption properties of obtained composite was evaluated by thermal analyzer method and compared with pure un...

Nanodiamond crystals containing single color centers have been grown by chemical vapor deposition (CVD). The fluorescence from individual crystallites was directly correlated with crystallite size using a combined atomic force and scanning confocal fluorescence microscope. Under the conditions employed, the optimal size for single optically active nitrogen-vacancy (NV) center incorporation was ...

The objective of this work is to study the effect of two key factors external magnetic field and applied current density during template-based electrodeposition of nickel nanowires using an electrode distance of 20 mm. Morphology, length, crystallite size and crystallographic characterization of the grown nickel nanowires at an electrode distance of 20mm are presented. For this electrode distan...

The objective of this work is to utilize a low-grade synthetic rutile to produce high-grade titania nanoparticles. Due to the nature of the precursor, the hydrothermal method needs modification in order to accommodate the precursors and chemical reagents. The product will be characterized with the XRD (crystallite size and crystallinity), EDXRF (chemical composition), SEM (Morphology), N2 adsor...

Mechanical alloying of Ti-Si and NiTi was performed by high-energy ball milling at ambient temperature. The structural and compositional evolutions during mechanical alloying were investigated. Results showed that the crystallite size of mechanically alloyed Ti-Si and Ni-Ti powders decreased with increasing milling time and the steady-state crystallite size was approximately 10 nm. The mechanic...

In this paper, we have reported convenient way to access CdTe nanorods by solvothermal decomposition using single source molecular precursor cadmium (II) bis-(isopropyl telluro) propane (SSMP) and quinoline as solvent at relatively low temperature (200oC).As synthesized nanomaterials are structurally characterized by XRD, SEM and UVVisible spectroscopy. SEM micrographs revealed formation of rod...

Hydrotalcites are quite prevalent in nature and their importance is growing more and more because of their very wide range of potential applications and uses. Because hydrotalcite does not exist in significant quantities in nature, coprecipitation methods are the most used for prepartion of hydrotalcite. In this study: Two types of Nano hydrotalcite compounds containing one divalent (Mg-Al) and...

Different samples of ZnS nanoparticals were synthesized by chemical co-precipitation method at room temperature using zincsulphate as zinc source and sodium sulphide as sulphur source. Structural properties of synthesized ZnS nanoparticles were studied by X-ray diffraction pattern (XRD) while optical properties were examined by UV-Visible absorption spectroscopy. XRD pattern showed the as synth...

Equal channel angular rolling (ECAR) is a severe  plastic deformation (SPD) technique which has been used to produce metal sheets with ultra-fine grain structure. In the present work, the relationships between the mechanical properties and microstructure of samples during the ECAR process have been investigated. The Rietveld method was applied to analyze the X-ray diffraction pattern and to det...