The isolated bidirectional ac–dc converter is for the 380-V dc power distribution system to control the bidirectional power flow and to improve its power conversion efficiency. Here the high-side switches of the ac– dc rectifier employ IGBTs without anti-parallel diodes and SiC diodes. In addition, the low-side switches are consisting of two MOSFETs to reduce the conduction loss in the rectific...

Multi-port DC-DC converter has attracted special interest in applications where multiple energy sources are used. In this project, a three-port converter with three active full bridges, two LCC resonant tanks, and a three-winding transformer is proposed. It uses a single power conversion stage with high-frequency link to control power flow between batteries, load, and a renewable source such as...

A new converter using a switched-inductor cell integrated with a switched-capacitor cell within a boost-like structure is proposed. The converter can achieve a very high dc conversion ratio. It can serve as the front-end dc-dc converter for a fuel cell in a UPS system. The inductors and capacitors are switched in a parallel-series configuration. The charging circuit of the inductors from the so...

A non-isolated DC/DC converter with high transfer gain is proposed in this paper. The presented converter consists of the switched inductor and three-level converters. The DC/DC power converter is three-level boost converter to convert the output voltage of the DC source into two voltage sources. The main advantages of DC/DC converter are using low voltage semiconductors and high gain voltage. ...

This paper presents the development of a high gain Boost converter applied to photovoltaic (PV) system. The converter was designed to be connected directly to the photovoltaic panel and perform the search for the maximum power point (MPPT). The new proposal seeks the MPPT is to connect each panel a converter for a high gain greater accuracy in finding the point of maximum power. The converter w...

DC-DC converters are switched power converters. They are used to convert one DC voltage to another DC voltage. It is inordinately used in industry as well as in research. The model of converter system varies from the ON state to the OFF state. The major drawback of the boost converter is the uncontrolled supply of voltage and current. So initially a convectional PID controller is designed to re...