PURPOSE The purposes of this study were (1) to examine whether posterior delamination is hidden to the most commonly used posterior viewing portal compared with differential rotator cuff portals and (2) to observe posterior delamination patterns so that a treatment-based classification system may be proposed. METHODS One-hundred thirty consecutive patients undergoing arthroscopic rotator cuff...

Biocompatible β-type Ti-45Nb alloy with a low elastic modulus is promising in alleviating the stress shielding effect of Ti-based hard-tissue replacement implants. In this work, ultra-fine-grained (UFG) microstructures different grain sizes were prepared by multi-axial compression (MAC) processing alloys, and mechanical properties fretting wear alloys investigated. The results show that yield s...

In this study, diamond films are deposited by using hot filament chemical vapor deposition (HFCVD), Nanocrystalline diamond (NCD) coated cemented tungsten carbide (WC-Co) milling tools are characterized, compared with microcrystalline diamond (MCD) and composite diamond coated ones, in terms of morphology with field emission scanning electron microscope (FESEM). Moreover, the diamond coated too...

TiO2/ZnO films grown by atomic layer deposition (ALD) demonstrated nanotribological behaviors using scratch testing. TEM profiles obtained an amorphous structure TiO2 and nanocrystalline structure ZnO, whereas the sample has significant interface between the TiO2/ZnO films. The experimental results show the relative XRD peak intensities are mainly contributed by a wurtzite oxide ZnO structure a...

Ultrasonic assisted drilling (UAD) has been reported effective for thrust force reduction during drilling of CFRP resulting in lower exit delamination. However, this process is not fully understood in relation to machining theory. This work focused on understanding the separate effects of chisel and cutting edges during UAD in comparison with conventional drilling (CD). Experiments were perform...

The purpose of this study was to compare differences in wear performance of conforming and nonconforming glenoid designs, using clinical, radiographic, and retrieved polyethylene glenoid component outcome Sixty-three glenoids met the study criteria, and each glenoid was assigned to the conforming group (if the radii of curvature of the humeral and glenoid components were identical) or the nonco...

The surface characteristics of the contact zone of tin-plated copper alloy contacts subjected to fretting motion for 8000, 16,800 and 48,000 cycles under unlubricated conditions are presented. The nature of the contact zone, at the verge of wearing out of the tin coating as well as upon the coating is completely worn out, is assessed using scanning electron microscopy (SEM), energy-dispersive X...

Chromium oxide coatings are chemically inert, have high mechanical strength, hardness and good optical characteristics; therefore, they have been widely used in many applications including corrosion protection, wear resistance, electronics, and optics. Cr2O3 is well suited for wear resistance applications, as it is one of the hardest oxides with 29.5 GPa hardness. Several deposition techniques ...

Six types of diamond-like carbon (DLC) coatings with zirconium (Zr)-containing interlayers on titanium alloy (Ti-6Al-4V) were investigated for improving the biotribological performance of orthopedic implants. The coatings consist of three layers: above the substrate a layer stack of 32 alternating Zr and ZrN sublayers (Zr:ZrN), followed by a layer comprised of Zr and DLC (Zr:DLC), and finally a...

The use of fiber reinforced plastics has increased in the last decades due to their unique properties. Advantages of their use are related with low weight, high strength and stiffness. Drilling of composite plates can be carried out in conventional machinery with some adaptations. However, the presence of typical defects like delamination can affect mechanical properties of produced parts. In t...