In this paper, the possibility of improving the global response of asphalt materials for pavement applications through the use of hydrated lime and Electric Arc-Furnace Steel Slag (EAFSS) was investigated. For this purpose, a set of asphalt mortars was prepared by mixing two different asphalt binders with fine granite aggregate together with hydrated lime or EAFSS at three different percentages...

Long term tensile creep studies were conducted on binary NiAl in the temperature range 700-1200 K with the objectives of characterizing and understanding the creep mechanisms. Inverse and normal primary creep curves were observed depending on stress and temperature. It is concluded that the primary creep of NiAl is limited by dislocation mobility. The stress exponent for creep, n, decreased fro...

Using nano-technology materials in the asphalt pavement industry is new compared with Portland cement concrete. The main objective of this study is to investigate the effects of nano-silica modification on some properties of a penetration grade asphalt cement and a typical asphalt concrete. 60/70 penetration grade bitumen was modified with different percentages of nano-silica (i.e. 1, 3 and 5%,...

Polypropylene is one of the most common, fastest growing and versatile thermoplastics currently used to produce tanks and chemical piping systems. Even at room temperature creep is considerable for polypropylene products. The creep behavior of strains, stresses, and displacement rates is investigated in a thick-walled cylinder made of polypropylene reinforced by functionally graded (FG) multi-w...

This study was conducted with grazing nursing calves (197 kg) to determine the effects of 1) limiting creep feed intake and 2) increasing the concentration of ruminal escape CP in creep feed at a limited level of creep feed intake on fescue and milk intake, ruminal NDF digestion, and total tract digestibility in calves fed high-quality, freshly harvested fescue. The treatments were 1) control (...

Today, rapid economic and industrial growth generates increasing amounts of waste materials such as waste tyre rubber. Attempts to inspire a green technology which is more environmentally friendly that can produce economic value are a major consideration in the utilization of waste materials. The aim of this study is to evaluate the effect of waste tyre rubber (crumb rubber modifier (CRM)), in ...

Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the...

The concept of the local approach is applied to investigate different damage mechanisms of structural steels by micromechanical material models. Static and dynamic fracture resistance curves for a neutron-embrittled weld material are derived from tensile and Charpy-type specimens with the modified Gurson model. The behaviour of a test piece with a crack in the fenitic base material beneath an a...

We studied the elastic moduli, ductile creep behavior, and brittle strength of shale-gas reservoir rocks from Barnett, Haynesville, Eagle Ford, and Fort St. John shale in a series of triaxial laboratory experiments. We found a strong correlation between the shale compositions, in particular, the volume of clay plus kerogen and intact rock strength, frictional strength, and viscoplastic creep. V...

Abstract Cavitation plays a central role during creep-fatigue. During recent years, fundamental models for initiation and growth of creep cavities that do not involve any adjustable parameters have been developed. These successfully used to predict rupture data austenitic stainless steels again without using parameters. However, it appears basic yet applied creep-fatigue assessments. A summary ...