We present a MEMS microphone that converts the mechanical motion of a diaphragm, generated by acoustic waves, to an electrical output voltage by capacitive fingers. The sensitivity of a microphone is one of the most important properties of its design. The sensitivity is proportional to the applied bias voltage. However, it is limited by the pull-in voltage, which causes the parallel plates to c...

This study is devoted to providing predictions of the pull-in parameters (pull-in voltage and pull-in displacement) of electro-statically actuated micro-beams based on a continuous model using Genetic Algorithm (GA) technique. A phenomenon in which the actuated electrode comes in direct contact with the fixed electrode due to the electrostatic force is called pull-in instability. Accurate deter...

Electrostatic actuators are used as voltage-controlled oscillators or resonators in high frequency applications. The change in deflection of a cantilever beam due to an applied voltage leads to change in capacitance between the plates of the beam. However, the range of operation of these devices is limited due to the nonlinear nature of the applied electrostatic forces as the cantilever beam mo...

In this paper, a nonlinear theory applicable to the design of nanotube based devices is presented. The role of finite kinematics for a doubly clamped nanotube device is investigated. In particular, we analyze the continuous deformation and instability (pull in) of a clamped-clamped nanotube suspended over an electrode from which a potential differential is imposed. The transformation of an appl...

In this paper, the effects of initial deflection on static and dynamic behaviors circular capacitive transducers are experimentally investigated. The obtained results in good agreement with numerical simulations. It is shown that has a major impact response resonator by shifting pull-in voltage, its increasing resonance frequency modifying bifurcation topology from softening to hardening behavi...

Using differential quadrature method (DQM), this study investigated pull-in instability of beam-type nano-switches under the effects of small-scale and intermolecular forces including the van der Waals (vdW) and the Casimir forces. In these nano-switches, electrostatic forces served as the driving force, and von-Karman type nonlinear strain was used to examine nonlinear geometric effects. To de...

Methods for calculating Available Transfer Capability (ATC) of the transmission systems may be grouped under Static and Dynamic methods. This paper presents a fast dynamic method for ATC calculations, which considers both Transient Stability Limits and Voltage Stability Limits as terminating criteria. A variation of Energy Function Method is used to determine the transient stability limit and t...

A general theoretical model using the coupling effect between the torsion and bending is presented in this paper, which characterizes the static properties of the electrostatic torsional micromirror, especially its pull-in effect. A set of normalized equations governing the static actuation properties of the torsional micromirror based on the parallel plate capacitor model is derived to demonst...

Methods for calculating Available Transfer Capability (ATC) of the transmission systems may be grouped under Static and Dynamic methods. This paper presents a fast dynamic method for ATC calculations, which considers both Transient Stability Limits and Voltage Stability Limits as terminating criteria. A variation of Energy Function Method is used to determine the transient stability limit and t...