A near-field electrospinning (NFES) process has been developed to deposit solid nanofibers in a direct, continuous, and controllable manner. A tungsten electrode with tip diameter of 25 microm is used to construct nanofibers of 50-500 nm line width on silicon-based collectors while the liquid polymer solution is supplied in a manner analogous to that of a dip pen. The minimum applied bias volta...

A very thin liquid jets can be obtained using electric fields. The electrically-driven bending instability of the jet enormously increases the jet elongation path and effectively leads to its tinning by very large ratios and can be used to produce nanofibres. The mechanism of electro-thinning of liquid jets, discovered almost one century ago, is yet not fully understood. In the following study ...

Nanofiber-based nonwoven mats produced in electrospinning setups are usually very fragile, which often limits their applicability. Yarns have the potential to enable incorporation of nanofibers into other materials using well-established techniques such as sewing, knitting, weaving and embroidering, thus broadening application nanofibers. Here, we review development continuous yarn processes. A...

Electrospinning refers to the process of generating nanofibers from electrified viscous polymeric jets. Though relatively easy to perform, this process is quite complex in its nature, given the large number of parameters that are involved. This study attempts to derive a relation between the final fiber diameter and the major process parameters. Two new dimensionless numbers describing viscous ...

Electrospinning is based on so-called bending instability which results in an erratic spiralling motion of the liquid jet as it proceeds towards a collecting electrode, where it is eventually deposited as a mat of micro/nanosized fibres. Most electrospinning models formulated within the slender approximation rely, however, on an inconsistent description of electrostatic interactions which rende...

morphological changes in polyvinyl butyral (pvb) electrospun nanofibres can be acquired by preparation of pvb spinning solution in different solvents.  accordingly, three solvents, including ethyl alcohol, n-butanol and isopropanol, with diverse physical properties (e.g. boiling point, density, dipole moment and dielectric constant) were used to prepare polyvinyl butyral (pvb) spinning solution...

objective(s):the aim of this study was to prepare electrospun nanofibers of celecoxib using combination of time-dependent polymers with pectin to achieve a colon-specific drug delivery system for celecoxib. materials and methods:formulations were produced based on two multilevel 22 full factorial designs. the independent variables were the ratio of drug:time-dependent polymer (x1) and the amoun...

among the synthetic polymers, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (phbv) microbial polyester is one of the biocompatible and biodegradable copolymers in the nanomedicine scope. phbv has key points and suitable properties to support cellular adhesion, proliferation and differentiation of nanofibers. nanofibers are noticeably employed in order to enhance the performance of biomaterials,...

With global concerns about the shortage of fossil fuels and environmental issues, the development of efficient and clean energy storage devices has been drastically accelerated. Nanofibers are used widely for energy storage devices due to their high surface areas and porosities. Electrospinning is a versatile and efficient fabrication method for nanofibers. In this review, we mainly focus on th...