In a number of different applications for enzymes and specific binding proteins a key technology is the immobilization of these proteins to different types of supports. In this work we describe a concept for protein immobilization that is based on nanofibrillated cellulose (NFC). NFC is a form of cellulose where fibers have been disintegrated into fibrils that are only a few nanometers in diame...

Objective(s): Antibacterial and antifungal nanocomposites are widely used in food packaging and pharmaceutical and medicine industries. Among the polymers of these nanocomposites, epoxy coatings are commonly used for health and industrial applications. The present study aimed to synthesize CuO nanoparticles using the chemical reduction method and characterized them by ultraviolet-visible (UV-Vi...

This article investigates the effect of contact ageing on fretting damage of an epoxy-based cathodic electro-deposited coating for use on automotive seat slide tracks (made of cold-rolled high strength steel). Static normal load was induced at the contact between the coating and an AISI52100 ball for a certain duration. It was identified that plastically deformed contact area increased logarith...

Reduced graphene oxide has attracted numerous interests due to its unique, superior electronic, optical, mechanical, and chemical properties. An epoxy resin with excellent mechanical electrical properties can be obtained by doping reduced enhance the function of polymer. Here, we prepared a uniform oxide/epoxy coating different content characterized it using field-emission scanning electron mic...

Isocyanate-free cathodic ED coatings. Most of the resins used in the cathodic electrodeposition (CED) coatings are made from modified epoxy resin and blocked polyisocyanate in which the crosslinking is achieved by polyurethane and polyurea formation. A resin system has been developed that is isocyanate free and avoids not only the toxicity aspect, but also, to a great extent, the weight loss of...

In this work, the effect of erosion on corrosion behavior of coal tar epoxy coating was evaluated using electrochemical impedance spectroscopy (EIS) measurements. The surface morphology of the coating was examined by scanning electron microscope (SEM) after 10, 20, 30, 45 and 60 min of erosion process at an impact angle of 90º. After 10 min of erosion process, the Nyquist plots showed just a si...

Epoxy coatings incorporating different content of sulfosalicylic acid doped polyaniline (PANI-SSA) have been investigated for corrosion protection of 5083 aluminum alloy in 3.5% NaCl solution. The performance of the coatings is studied using a combination of electrochemical impedance spectroscopy (EIS), open circuit potential (OCP), gravimetric tests, adhesion tests, scanning electron microscop...

We aimed to embed silica optical fibers in composites (epoxy vinyl ester matrix reinforced with E-glass unidirectional fibers in mass fraction of 60%) in order to further monitor the robustness of civil engineering structures (such as bridges). A simple system was implemented using two different silica optical fibers (F1-double coating of 172 µm diameter and F2-single coating of 101.8 µm diamet...

A compact cryogenic calibration target is presented that has a peak diffuse reflectance, R ⩽ 0.003, from 800 to 4800 cm(-1) (12 - 2 μm). Upon expanding the spectral range under consideration to 400-10,000 cm(-1) (25 - 1 μm) the observed performance gracefully degrades to R ⩽ 0.02 at the band edges. In the implementation described, a high-thermal-conductivity metallic substrate is textured with ...

Electron backscatter diffraction (EBSD) is becoming a widely used technique to determine crystallographic orientation in biogenic carbonates. Despite this use, there is little information available on preparation for the analysis of biogenic carbonates. EBSD data are compared for biogenic aragonite and calcite in the common blue mussel, Mytilus edulis, using different types of resin and thickne...