A lignin-epoxy resin composite was prepared by blending lignin/wood flour with an epoxy resin and polyamine. The effects of the wood flour on the mechanical, thermal creep, and creep recovery properties, as well as the microstructure of the composite, were studied. Among the mechanical properties, the initial modulus increased with increasing content of wood flour. The glass transition temperat...

Carbon fiber reinforced polymer (CFRP) sheets can be externally bonded for retrofit of concrete structures, improving flexure and sheer strength in the concrete. The key to CFRP sheets is the bond to the concrete, as bond is the means to transfer stress between the tow sheet and the concrete. Experimentation has been conducted to test a current market fiber-resin system, and to develop a resin ...

To evaluate the efficiency of modified epoxy resins using bisphenol-A, hydantoin & cyanuric acid & to investigate the structural change due to the presence of Nitrogen atoms in polymeric chain for improved insulating properties, weatherability etc. The samples of epoxy resin bisphenol-A, hydantoin and Cyanuric acid based was taken for X-ray diffraction analysis. The diffraction patterns were Fo...

The effect of adding different percentages nano-graphene oxide (NGO) into the epoxy resin on mechanical properties NGO/epoxy and maximum peeling force fiber-metal laminates (FMLs) with composite cores are investigated in this paper. Three NGO including 0.1, 0.35 0.50 weight (wt. %) used to fabricate tensile test samples NGO/epoxy. Hand lay-up method is FML specimens glass fiber reinforced plast...

The influence of chemical cleaning agents on the bond strength between resin cement and glass-fiber posts was investigated. The treatments included 10% hydrofluoric acid, 35% phosphoric acid, 50% hydrogen peroxide, acetone, dichloromethane, ethanol, isopropanol, and tetrahydrofuran. Flat glass-fiber epoxy substrates were exposed to the cleaners for 60 s. Resin cement cylinders were formed on th...

–In this research manufacturing of the Kevlar-Mg AZ31B sandwich composite is done. Sandwich prepared using Kevlar fiber and Mg alloy. This manufactured by Vacuum Assisted Resin Transfer Moulding (VARTM) method. method uses vacuum pressure difference causes bonding fiber- metal surface epoxy resin. In alloy act as core material a face skin. fiber-metal will have enhanced mechanical properties th...

Resin tubes made of epoxy base material and fibers are widely used in the transportation, aeronautics industries due to their high mechanical properties. Different reinforcing resins usually making these lead various In this study, by using a 45-degree unilateral winding method reinforced Glass, Carbon, Kevlar hardness wear behaviors were investigated. The results showed that highest was obtain...

polysulfide resins,with trade name of  g4 and g112, with short and long chain lengths respectively, were used as reactive modifiers to toughen epoxy resin. the effects of molecular weights of g4 and g112 on impact resistance, dielectric constant, thermal conductivity as well as decomposition  heat and adhesion properties of toughened epoxy were investigated. the impact strength and the dielectr...