The relationship between impact damage and the fatigue behavior of � -TiAl has been examined. Axial fatigue specimens fabricated from cast Ti-47.9Al-2.0Cr-1.9Nb (to be referred to as 48-2-2) and Ti-47.3Al-2.2Nb-0.5Mn-0.4W-0.4Mo-0.23Si (to be referred to as WMS) alloys were damaged by impact under controlled conditions with a 60 deg wedge-shaped indenter to simulate assembly-related damage in lo...

The fatigue strength offerritic ductile iron, Grade EN-GJS-400-18U-LT. was determined for large section castings measuring 4 by 24 by 24 inches. Fatigue testing was conducted in bending fatigue in order to determine the influence of surface conditions on fatigue strength. Test specimens with various surface conditions were evaluated, including notched and un-notched specimens, as well as those ...

abstract – aluminium 7075- t651 alloys are widely used in the production of light weight structures requiring a high strength to weight ratio and high corrosion resistance. the effect of processing parameters on fatigue life of 7075- t651 aluminium joints produced by friction stir welding was investigated in the present study. welding samples were made by employing rotating tool speed of 770, 9...

This study examined the effects of heavy resistance training on dynamic exercise-induced fatigue task (5 x 10RM leg-press) after two loading protocols with the same relative intensity (%) (5 x 10RM(Rel)) and the same absolute load (kg) (5 x 10RM(Abs)) as in pretraining in men (n=12). Maximal strength and muscle power, surface EMG changes [amplitude and spectral indices of muscle fatigue], and m...

The tension-tension fatigue behavior of unidirectional C/SiC ceramic-matrix composite at room temperature and 800 °C under air has been investigated. The fatigue hysteresis modulus and fatigue hysteresis loss energy corresponding to different number of applied cycles have been analyzed. The fatigue hysteresis loops models for different interface slip cases have been derived based on the fatigue...

Industrial applications often require welded joints of dissimilar metals to perform reliably under adverse working conditions. Such conditions demand high resistance failure modes, such as fatigue, corrosion, and creep. In involving intense vibrational cyclic loading conditions, strength-to-weight ratio metals, including aluminum, are more vulnerable fatigue failure. This study investigates the...

High cycle fatigue has become the leading cause of failure in gas turbine engine blades in recent years [1]. The majority of these failures were associated with surface damage such as foreign object damage (FOD). Therefore, the ability of a material to resist impact damage and the subsequent fatigue propagation of any cracks that may result has become a crucial design consideration. Substantial...

It is known that micron-scale polycrystalline silicon thin films can fail in room air under high frequency (40kHz) cyclic loading at fully-reversed stress amplitudes as low as half the fracture strength, with fatigue lives in excess of 1011 cycles. This behavior has been attributed to the sequential oxidation of the silicon and environmentally-assisted crack growth solely within the SiO2 surfac...

A recent two-parameter fatigue model, aimed at the prediction of the fatigue behaviour of composite materials, was applied to fatigue results available in the literature, concerning graphite/epoxy laminates subjected to tension-compression loadings. It was found that the model, successfully applied in the case of tension-tension and compression-compression fatigue, also works when the sign of s...