A polymeric micro-cantilever array has been developed that mimics the biological front-end processing in the mammalian cochlea, and is intended for use in applications of auditory prostheses. Made of optical epoxy polymer molded over a silicon substrate, the micro-cantilevers have similar mechanical performance as the basilar membranes in the mammalian ears. The polymeric cantilevers, which are...

In this investigation an elastic stress analysis is carried out a woven steel fiber reinforced thermoplastic cantilever beam loaded uniformly at the upper surface. The composite beam material consists of low density polyethylene as a thermoplastic (LDFE, f.2.12) and woven steel fibers. Granules of the polyethylene are put into the moulds and they are heated up to 160°C by using electrical resis...

5 Simple example problems 20 5.1 Cantilever beam . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5.2 Frequency calculation of a beam loaded by compressive forces . . 27 5.3 Frequency calculation of a rotating disk on a slender shaft . . . . 29 5.4 Thermal calculation of a furnace . . . . . . . . . . . . . . . . . . 35 5.5 Seepage under a dam . . . . . . . . . . . . . . . . . . . . . . ...

The frequency response of a cantilever beam is strongly dependent on the fluid in which it is immersed. In a companion study, Sader @J. Appl. Phys. 84, 64, ~1998!# presented a theoretical model for the flexural vibrational response of a cantilever beam, that is immersed in a viscous fluid, and excited by an arbitrary driving force. Due to its relevance to applications of the atomic force micros...

Electrostatic actuators are used as voltage-controlled oscillators or resonators in high frequency applications. The change in deflection of a cantilever beam due to an applied voltage leads to change in capacitance between the plates of the beam. However, the range of operation of these devices is limited due to the nonlinear nature of the applied electrostatic forces as the cantilever beam mo...

In this paper, we present the fabrication and packaging of a cantilever-based airflow sensor integrated with optical fiber. The sensor consists of a micro Fabry-Perot (FP) cavity including a fiber and a micro cantilever that is fabricated using the photolithography method. Airflow causes a small deflection of the micro cantilever and changes the cavity length of the FP, which makes the fringe s...

Theoretical models for the frequency response of a cantilever beam immersed in a viscous fluid commonly assume that the fluid is unbounded. Experimental measurements show, however, that proximity to a surface can significantly affect the frequency response of a cantilever beam. In this article, we rigorously calculate the effect of a nearby surface on the frequency response of a cantilever beam...

This paper discusses some notes on the vibration design for the piezoelectric cooling fan. After reviewing the fundamental formulas of the cantilever Euler beam, it is not easy to find the optimal design of the piezoelectric fan. The experiments also show the complicated results of the vibration behavior and air flow. Keywords—Piezoelectric cooling fan, vibration, cantilever Euler beam, air flow.

Plasmonic lithography with a contact probe records nano-meter scale features and has high-throughput owing to its capability to scan in contact mode. The probe is commonly based on a micrometer-scale cantilever, which leads to the tip-positioning problem due to force-deflection that induces lateral tip displacement. We propose a geometrically modified probe to achieve high positioning accuracy....

in this paper, the stability of a functionally graded magneto-electro-elastic (fg-mee) micro-beam under actuation of electrostatic pressure is studied. for this purpose euler-bernoulli beam theory and constitutive relations for magneto-electro-elastic (mee) materials have been used. we have supposed that material properties vary exponentially along the thickness direction of the micro-beam. gov...