The objective of this study was to manufacture new biodegradable fiberboards by thermo-pressing. The starting material was deoiled cake (only 0.9% oil content), generated during the biorefinery of sunflower (Helianthus annuus L.) whole plant in a co-rotating twin-screw extruder. All fiberboards were cohesive mixtures of proteins and lignocellulosic fibers, acting respectively as binder and rein...

Copyright © Korean Carbon Society http://carbonlett.org Abstract The use of carbon nanotubes (CNTs) as a reinforcing material in a polymer matrix has increased in various industries. In this study, the flexural behavior of CNT-modified epoxy/ basalt (CNT/epoxy/basalt) composites is investigated. The effects of CNT modification with silane on the flexural properties of CNT/epoxy/basalt composite...

A finite element model is developed to analyse, as a function of volume fraction, the effects of reinforcement geometry and arrangement within a timber beam. The model is directly validated against experimental equivalents and found to never be mismatched by more than 8% in respect to yield strength predictions. Yield strength increases linearly as a function of increasing reinforcement volume ...

background and aim: this study investigated the reinforcing effect of silica nanoparticles when incorporated into the matrix phase of an experimental dental fiber reinforced composites (frc) through the evaluation of the flexural properties of the composites. materials and methods: in this experimental study frc samples were divided into two main groups (containing two or three bundles) either ...

in order to investigate the flexural behaviors of rc beams after freeze-thaw cycles, compressive strength test of concrete cubes after 0, 50, 100, 125 freeze-thaw cycles were made, and static flexural experiment of 48 rc beams after 0, 50, 100, 125 freeze-thaw cycles were made. the relationships of relative compressive strength, mass loss rate, relative dynamic elastic modulus and numbers of fr...

Flexural wave speeds on beams or plates depend upon the bending stiffnesses which differ by the well-known factor (1 - nu2). A quantitative analysis of a plate of finite lateral width displays the plate-to-beam transition, and permits asymptotic analysis that shows the leading order dependence on the width. Orthotropic plates are analyzed using both the Kirchhoff and Kirchhoff-Rayleigh theories...

Tensile properties of the larval cuticle of Manduca sexta were measured during the fifth instar. It was found that as the larvae grew and the cuticle thickened, the tangent modulus (intrinsic stiffness) for the cuticle declined rapidly. The extensibility of the cuticle during the growth period remained relatively high and fairly constant, while the flexural stiffness remained low. Subsequently,...

The aim of this study was to assess the effects of partial carbon or glass fiber reinforcement on the flexural properties of All-on-Four provisional fixed denture base resin. The carbon or glass fibers were woven (3% by weight) together in three strands and twisted and tightened between the two abutments in a figure-of-"8" pattern. Four types of specimens were fabricated for the three-point loa...

The effect of residual lignin content on the mechanical strength and water absorption of kraft pulp/ polypropylene composites was studied. To meet this objective, hornbeam wood chips were converted to kraft pulp at three different alkalinities (15, 20, and 25%) and three different cooking times (60, 90, and 120 min). The residual lignin contents of these pulps were determined according to the T...