a solid – liquid – gas, multiphase reactor, called inverse fluidized bed bioreactor (ifbbr) was used in this study for the treatment of starch industry wastewater of high organic content and acidic nature. mixed culture obtained from the sludge, taken from starch industry effluent treatment plant, was used as microorganisms. experiments were carried out in an inverse fluidized bed bioreacto...

The objective of this research was to evaluate several different pressure probe techniques used to measure the pressure fluctuations in a fluidized bed, to determine the effect of bed parameters on the power spectrums from the corresponding pressure fluctuations, and to develop a second-order model that describes the power spectrums of these pressure fluctuations. The motivation for this work i...

We report initial NMR studies of gas dynamics in a particle bed fluidized by laser-polarized xenon (129Xe) gas. We have made preliminary measurements of two important characteristics: gas exchange between the bubble and emulsion phases and the gas velocity distribution in the bed. We used T2* contrast to differentiate the bubble and emulsion phases by choosing solid particles with large magneti...

in this search drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. at each drying operating conditions the volume of green pea was calculated by measuring the three...

soft-sphere discrete element method (dem) and navier-stokes equations were coupled with equations of energy for gas and solids to investigate the process of agglomeration in fluidized bed of polyethylene particles at high temperature. the newton’s second law of motion was adapted for translational and rotational motion of particles and agglomerates. the cohesive force for polyethylene particles...

drying characteristics of green pea (pisum satium) with an initial moisture content of 76% (db) was studied in a fluidized bed dryer assisted by microwave heating. four drying air temperatures (30, 40, 50 and 60ºc) and five microwave powers (180, 360, 540, 720 and 900w) were adopted. several experiments were conducted to obtain data for sample moisture content versus drying time. the results sh...

effluent from ro (reverse osmosis) systems during recovery gradually becomes concentrated and supersaturated with soluble salts such as calcium carbonate (caco3), calcium sulfate (caso4), barium sulfate (baso4) and silica (sio2). thus we were looking for procedures to prevent precipitation of soluble salts on the membrane surface and decrease membrane permeability. therefore, recovery could be ...

Various theoretical models for fluidized bed to surface heat transfer have been considered to explain the mechanism of heat transport. The particulate fluidized bed which is the common case for liquid–solid fluidized bed is much simpler and homogeneous and transport operation can be easily modeled. The heat transfer coefficient increases to a maximum and then steadily decreases as the bed void ...

Fluidized bed has many advantages such as high heat and mass transfer rates, temperature homogeneity and good mixing property. However, conventional fluidized bed has some limitations; operation at high gas velocity leads to slugging and there exists minimum particle size for the uniform fluidization. Recently, a rotating fluidized bed (RFB) has attracted special interest, since it has a possib...