In this study, 5052 Al–Mg alloy was pre-treated and friction stir processing (FSP) was then performed on the specimens to explore the deformation resistance. The experimental results indicate that the FSP specimens not only had better tensile properties but also better vibration fracture resistance. It is significant that the tensile elongation and deformation resistance tended to increase as t...

Isolated sacral fractures which occur by shear forces on the pelvic ring are seen less commonly and they are commonly transversely oriented. A 29-year-old Turkish female patient, who sat in front seat in the car, was unrestrained, and another car hit them from right front side of their vehicle. Physical examination revealed considerable tenderness over the right superior gluteal region and excr...

Bin Zhou, M. D. Thouless, and S. M. Ward Department of Mechanical Engineering Department of Material Science and Engineering University of Michigan Ann Arbor, MI, 48109 Scientific Research Laboratory Ford Motor Company Dearborn, MI, 48124 Abstract A methodology for determining the cohesive facture parameters associated with pull-out of spot welds is presented. Since failure of a spot weld by pu...

in this paper, the mean value of strain energy density criterion has been used to predict the critical fracture load in specimens with u-shaped notch under bending loads. an equation for calculation of averaged strain energy density in this zone has been presented. bending loads under mode i have been considered. two cases have been studied: 1) the control volume only includes the semicircular ...

Sea ice exhibits considerable seasonal and longerterm variations in extent, concentration, thickness, and age, and is characterized by a complex and continuously changing distribution of floe sizes and thicknesses, particularly in the marginal ice zone (MIZ). Models of sea ice used in current climate models keep track of its concentration and of the distribution of ice thicknesses, but do not a...

Fracture has always been a serious concern in the design and repair of steel structures such as ships. Because of these concerns, much research has been ongoing in the causes of fractures and in ways which they could be predicted and thus prevented. The objective of this study was to flnd, test and evaluate a method for measuring tht:: critical strain energy density with tensile specimens. Plas...

In the present study, the microstructure and mechanical properties of the dissimilar welding between ASTM A335 low alloy steel and ER309L austenitic stainless steel were investigated using the gas tungsten arc welding process. The welding of dissimilar materials between ASTM A335 low alloy steel and ER309L austenitic stainless steel was found to have a significant effect on the microstructure w...