The adsorption of ammonium ions onto a Chinese natural zeolite in an agitated batch adsorber was studied. A trial-and-error non-linear method was developed to examine two widely used isotherms, the Langmuir and Freundlich. The data gained from the adsorption system fitted the Freundlich isotherm better. An ion exchange model, describing the relationship among the total metal ions in the solutio...

Water pollution caused by the lead(II) from the spent liquor has caught much attention. The research from the theoretical model to application fundaments is of vital importance. In this study, lead(II) adsorption isotherms are investigated using a series of hybrid membranes containing mercapto groups (-SH groups) as the hybrid adsorbents. To determine the best fitting equation, the experimental...

This study examined the interactions of MoO4(2-) + SO4(2-), MoO4(2-) + SeO4(2-), and MoO4(2-) + SeO3(2-) systems on gamma-Al2O3 to better understand the competitive adsorption of these anions in the natural environment. The Freundlich isotherms of anionic adsorption onto gamma-Al2O3 in single and binary solutes were also investigated to estimate the competition between these anions. Experimenta...

In this study, removal of copper (Cu(2+)) and zinc (Zn(2+)) from aqueous solutions is investigated using Cankiri bentonite, a natural clay. During the removal process, batch technique is used, and the effects of pH, clay amount, heavy metal concentration and agitation time on adsorption efficiency are studied. Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherms are applied in order to...

One of the causes of water pollution is the presence of heavy metals in water. In the present study, an adsorbent prepared from the raw bark of the Pongamia pinnata tree is used for the removal of ferrous or ferric ions from aqueous and waste water containing heavy metals. Adsorption studies were conducted at different pH, concentration of metal ion, amount of adsorbent, contact time, agitation...

Batch adsorption of recalcitrant melanoidin using the abundantly available coal fly ash was carried out. It had low specific surface area (SBET) of 1.7287 m2/g and pore volume of 0.002245 cm3/g while qualitative evaluation of the predominant phases in it was done by XRD analysis. Colour removal efficiency was found to be dependent on various factors studied. Maximum colour removal was achieved ...

Grape pomace (pulp and skins) was investigated as a new biosorbent for removing mycotoxins from liquid media. In vitro adsorption experiments showed that the pomace obtained from Primitivo grapes is able to sequester rapidly and simultaneously different mycotoxins. Aflatoxin B1 (AFB1) was the most adsorbed mycotoxin followed by zearalenone (ZEA), ochratoxin A (OTA), and fumonisin B1 (FB1), wher...

In this study, two Carbon Molecular Sieves using Pistachio shell (CMS P) and Walnut shell (CMS W) were prepared by a chemical vapor deposition method and used for pressure swing adsorption and separation of CO/H2 and CO/CH4. Adsorption isotherms of gases obtained for both CMS’s. The Dubinin-Radushkevich isotherm model was used for comparing pore volum...

Carbon slurry, dried in open air, has been used as an adsorbent material for the removal of nickel(II) from aqueous solutions at different experimental conditions in batch adsorption technique. The time required to attain equilibrium was found to be 50 minutes. The effects of initial concentration of Ni(II), particle size of adsorbent, adsorbent dose, temperature and pH on removal of nickel(II)...

Batch adsorption of recalcitrant melanoidin using the abundantly available coal fly ash was carried out. It had low specific surface area (SBET) of 1.7287 m2/g and pore volume of 0.002245 cm3/g while qualitative evaluation of the predominant phases in it was done by XRD analysis. Colour removal efficiency was found to be dependent on various factors studied. Maximum colour removal was achieved ...