The conventional method used for glass melting is air-fuel firing, which is inefficient, energy-intensive and time-consuming. In this study, an innovative in-flight melting technology was developed and applied to glass production for the purposes of energy conservation and environmental protection. Three types of heating sources, radio-frequency (RF) plasma, a 12-phase alternating current (ac) ...

Due to long life of steam power plants in Iran, transformation of steam cycles to combined cycles is under consideration. Bandar-Abbas steam power plant with capacity of 320 MW has been analyzed in this work. This old plant is located near the harbor city of Bandar-Abbas at southern Iran. Method of exergy analysis is used to study the current and the repowered systems. Optimum state of the repo...

Fluctuations in the fuel flow rate may occur practical combustion systems and result flame destabilization. This is particularly problematic lean ultralean modes of burner operation. In this study, response a ceramic porous to fluctuations different blends methane hydrogen investigated experimentally. Prior injection into burner, blend premixed with air at equivalence ratios below 0.275. The st...

The effects of fuel stream dilution on the liftoff, stabilization, and blowout characteristics of laminar nonpremixed flames NPFs and partially premixed flames PPFs are investigated. Lifted methane-air flames were established in axisymmetric coflowing jets. Because of their flame suppression characteristics, two predominantly inert agents, CO2 and N2, were used as diluents. A time-accurate, imp...

In this work, we focus on robustness analysis of an integrated fuel cell and fuel reforming (FCFR) system, which relies on a feedback controller to mitigate hydrogen starvation and temperature overshoot during load transitions. The fuel reformer is used to process natural gas into a hydrogen rich flow to be utilized in a proton exchange membrane fuel cell (PEM-FC). The feedback controller uses ...

Background: Iran is located in the seventh rank in terms of CO2 emissions resulting from the fuel combustion in the world. Gas compressor booster stations, due to the several sources of contaminants, are causing the release of large amounts of CO2 and CH4, which will cause climate change therefore, estimating the emissions of the gases from oil and gas, different processing units are necessary....

Metals contained in the waste transfer to the waste incineration products, including flue gas, fly ash, and bottom ash, as different oxide, nitride, carbides, and other phases. Most of the metal-based phases formed in incineration are toxic and their emissions need to be strictly controlled. Therefore, behavior of metal species during incineration must be well understood. Such understanding is ...

act— A CFD-based numerical model has been ed for the determination of the volume concentration ber density of soot in a laminar diffusion flame of in air, under transient condition following ignition of e. The transience is studied from the point of ignition final steady state is reached. The burner is an axiric co-flowing one with the fuel issuing through a port and air through an annular port...

Based on the existing biomass co-firing technologies and the known innate drawbacks of dedicated biomass firing, including slagging, corrosion and the dependence on fuel, a new model of agro/forestry residue pellets/shreds and coal co-fired in a large Pulverized Coal (PC) furnace was proposed, and the corresponding technical and economic assessments were performed by co-firing testing in a 300 ...