this article deals with the buckling analysis of perfectly bonded cross-ply laminated composite plates reinforced by wavy carbon nanotubes (cnts) under in-plane loads using element free galerkin (efg) method based on first-order shear deformation theory (fsdt). the wavy single-walled cnts and poly-co-vinylene are used for the fibers and the matrix, respectively. the cnt fibers are distributed i...

in this paper, the stability of a functionally graded magneto-electro-elastic (fg-mee) micro-beam under actuation of electrostatic pressure is studied. for this purpose euler-bernoulli beam theory and constitutive relations for magneto-electro-elastic (mee) materials have been used. we have supposed that material properties vary exponentially along the thickness direction of the micro-beam. gov...

Calcium hexaluminate (CA6) was incorporated into the matrix of magnesio aluminate spinel-alumina (MA-A) via infiltration of a porous preform fabricated from α-Al2O3 and MgO powders with a saturated calcium acetate solution and subsequent firing, forming CA6/(MA-A) functionally composites with graded fracture toughness. Actually, the porous preform was partially and perpendicularly immersed (1/4...

in this article, thermal stability of beams made of functionally graded material (fgm) is considered. the derivations of equations are based on the one-dimensional theory of elasticity. the material properties vary continuously through the thickness direction. tanigawa's model for the variation of poisson's ratio, the modulus of shear stress, and the coefcient of thermal expansion is...

a r t i c l e i n f o Keywords: Concrete (E) Fiber reinforced concrete (FRC) (E) Constitutive relationship (C) Cohesive fracture (C) Fracture energy (C) A simple, effective, and practical constitutive model for cohesive fracture of fiber reinforced concrete is proposed by differentiating the aggregate bridging zone and the fiber bridging zone. The aggregate bridging zone is related to the total...

Functionally graded materials (FGM) present enormous potential to combine with distinct mechanical and thermal properties in a component via compositional gradient throughout the body. In work, step Al2O3/NbC composites were assessed order obtain FGM high hardness good fracture toughness. Step uniaxially pressed cylinders consolidated by Spark plasma sintering (SPS) into fully dense (>99% TD) c...

Cementitious materials are widely used in construction. For their low ductility, they typically need to be reinforced by steel rebars, which cause potential corrosion problems. Polymeric reinforcement, does not have problems, has been replace rebars. However, a relatively high reinforcing ratio is usually required for the cementitious composites conventional polymeric reinforcement. Owing custo...