Welding is a reliable and effective metal fabrication process which is widely used in industries. High heating at a one location during welding and further rapid cooling generates residual stress and distortion in the weld and base metal. In last few decades various research efforts have been directed towards the control of welding process parameter aiming at reducing residual stress and distor...

In this work a numerical investigation of transient temperature profile of laser beam welding process is carried out. A 3-D finite element modelling isdevelopedconsidering combined double-ellipsoidalheat source model for both spot and moving heat source. The temperature dependent thermo-physical material property of Ti-6Al-4V alloy isincorporated. The effect of latent heat of fusion and convect...

in this paper, the temperature distribution around a moving heat source had been investigated including the phase change and non phase change . in non-phase change state, the governing equation was converted to finite difference equation by finite volume method and the equation was solved by alternating direction implicit method. this method was unconditionally stable . in phase change state, t...

in this study, a new method for joining aluminum tubes in subsurface structures using steel converting and aluminum welding are presented and reviewed. but near the weld area is under high thermal cycle and will cause residual stresses in heat affected zone. therefore for assessment of proposed connection from the perspective of residual stress by using the finite element method welding of tube...

Fe-2.25Cr-1Mo a widely used material for headers and steam tubes of boilers. Welding of steam tube to header is required for production of boiler. Heat affected zone of the weld can have poor mechanical properties and poor corrosion behavior leading to weld failure. The cost of material used for steam tube and header of boiler should be controlled. This study propose a new materials design for ...

The purpose of this study was to discuss the microstructure, recrystallization, and mechanical property evolutions in the heat-affected zones and fusion zones during dissimilar stainless steels welding. The morphology, quantity and chemical composition of the -ferrite were analyzed by using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and ele...

The damaged K465 nickel-based superalloy parts were repaired by laser forming repair technology. The cracking characteristics and grain boundary liquation in heat affected zones were investigated by optical microscopy (OM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). It was found that the cracks originated from the heat-affected zone and extended to the repai...