In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of a thermosyphon with a copper tube having 25 and 32 mm inside and outside diameters. Distilled water was used as the wor...

In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of the thermosyphon. The experimental boiling and condensation heat transfer coefficients inside the thermosyphon were com...

Nomenclature a = stoichiometric coefficient av = surface-to-volume ratio C;, Cb; = surface and bulk concentration, vol % Da = Damkohler number Eif R = activation energy, K F = steady-state function h = heat-transfer coefficient K, = adsorption equilibrium coefficient k, k0 = reaction rate constant and preexponential factor, respectively kc = mass-transfer coefficient l = apparent reaction order...

Title of Document: CONVECTION AND FLOW BOILING IN MICROGAPS AND POROUS FOAM COOLERS Dae Whan Kim, Doctor of Philosophy, 2007 Directed By: Professor Avram Bar-Cohen Professor Bongtae Han Department of Mechanical Engineering An open and foam-filled microgap cooler, providing direct liquid cooling for a simulated electronic/photonic component and which eliminates the problematic thermal resistance...

Experimental investigations of heat transfer coefficient of CuO/Water nanofluid are reported in this paper. The heat transfer coefficient of the CuO/water was measured with the help of double pipe heat exchanger. The nanofluid was prepared by dispersing a CuOnano particle in deionized water. CuO/water nanofluid with a nominal diameter of 27nm at different volume concentrations (0.1 &0.3 vol.%) ...

The enhancement of heat transfer by an electric field to a spherical droplet translating at intermediate Reynolds number is numerically investigated using a finite volume method. Two heat transfer limits are considered. The first limit is the external problem where the bulk of the resistance is assumed to be in the continuous phase. Results show that the external Nusselt number significantly in...

the main purpose of this study is to perform numerical simulation of nanofluids as the coolant in vver-440 fuel rod bundle. the fuel rod bundle contains 60 fuel rods with length of 960 mm and 4 spacer grids. in vver-440 fuel rod bundle the coolant fluid (water) is in high pressure and temperature condition. in the present thermo-hydraulic simulation, water-al2o3 nanofluids containing various vo...

thermal resistance of the external walls of buildings is highly important for reducing and optimizing the energy consumption needed for heating and cooling the buildings. identifying and evaluation of the thermal performance of common external wall systems can be very effective in improving the heat resistance. the hollow clay- block system extremely are in use in the iran construction system, ...

the presence of particles in liquid-solid fluidized beds enhances the bed heat transfer, because the movement of the particles leads to an increased turbulence in the system. moreover, the violent movement of the particles has a positive effect on fouling of the heat transfer surface. the aim of this investigation was to perform systematic measurements of bed voidage and heat transfer coefficie...

We consider an inverse parabolic problem. We prove that the heat radiative coefficient, the initial temperature and a boundary coefficient can be simultaneously determined from the final overdetermination, provided that the heat radiative coefficient is a priori known in a small subdomain. Moreover we establish a stability estimate for this inverse problem.