cooling towers are widely used in most industrial units to reject waste heat to the atmosphere. this paper deals with an experimental analysis of heat and mass transfer phenomena between water and air by direct contact in a cooling tower. the tower is filled with 6 type packing. in this study temperature and pressure drop and tower characteristics was used in determining experimentally the ther...

the forced convection heat transfer of turbulent al2o3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. the governingequations have been solved using finite volume method (fvm) coupled with simple algorithm. it isassumed the heat flux is constant on the grooved walls. the single-phase approach is applied for the...

Detailed knowledge of local external heat transfer around a turbine airfoil is critical for an accurate prediction of metal temperature and component life. This paper discusses the results of measurements of the local gas side heat transfer coefficient distribution which were performed in an annular gas turbine vane hot-cascade test facility and provides comparisons with analytical predictions....

Heat transfer with liquid–vapor phase change in microchannels can support very high heat fluxes for use in applications such as the thermal management of high-performance electronics. However, the effects of channel cross-sectional dimensions on the two-phase heat transfer coefficient and pressure drop have not been investigated extensively. In the present work, experiments are conducted to inv...

in this paper, overall heat transfer coefficient and friction factor of water based γ-al2o3 nanofluid in a double tube counter flow heat exchanger have been measured experimentally under turbulent flow condition. for better dispersion of γ-al2o3 nanoparticles in distilled water, magnetic stirrer and ultrasonic vibrator (with a power of 240 kw and frequency of 35 khz) were implemented. the stabi...

the heat and mass transfer analysis for mhd casson fluid boundary layer flow over a permeable stretching sheet through a porous medium is carried out. the effect of non-uniform heat generation/absorption and chemical reaction are considered in heat and mass transport equations correspondingly. the heat transfer analysis has been carried out for two different heating processes namely; the prescr...

Experiments were conducted to determine the influence of local vapor quality on local heat transfer coefficient in flow boiling in an array of microchannels. Additionally, the variation of local heat transfer coefficient along the length and width of the microchannel heat sink for given operating conditions was investigated over a range of flow parameters. Each test piece includes a silicon par...

In this study, the convective heat transfer and pressure drop in laminar flow of Al2O3/water and CuO/water nanofluids through square and triangular cross-sectional ducts have been numerically investigated using new technique. It has been assumed that there is constant heat flux boundary condition at walls. In addition, to include the presence of nanoparticles, the dispersion model has been used...