Rock structures are subjected to cyclic tension-compression loading due to a blasting, earthquake, traffic and injection-production in underground storage case. Therefore study the fatigue behavior of rock samples under this type of loading is required. In this study, the accumulated fatigue damage for a Green Onyx rock sample which consisted of only one mineral composition with two-step high-l...

The mechanical properties of demineralized bovine cortical femur bone were investigated by cyclic loading-unloading compression in three anatomical directions (longitudinal, radial, transverse) within the physiological strain range. The loading responses in the radial and transverse directions were nearly linear up to 2% strain, while the response in longitudinal direction was strongly non-line...

Combined in-phase tension/torsion loading was applied to 8-ply 45° 4 E-glass/epoxy composite shafts under monotonic and fatigue conditions to determine the effects of multi-axial loading on its failure. A damage criterion for multi-axial monotonic loading was proposed considering the contribution of both normal and shear stresses on the plane of failure. The experimental data showed an excellen...

background: there are many concerns regarding the marginal seal of composite restorations, especially when composite restorations are subjected to cyclic loading. the aim of this study was to evaluate the effect of cyclic loading on the microleakage of silorane based composite compared with low shrinkage methacrylate-based composites in class v cavities. materials and methods: in this in vitro ...

Ductile fiber-reinforced cement-based composites (DFRCCs) are being investigated for new design as well as retrofitting of structures in seismic regions. DFRCC is highly ductile and is characterized by strain-hardening in tension to strains over 3% and by unique cyclic loading behavior. To accurately predict the structural performance of DFRCC components under cyclic and seismic loading, a robu...

In contrast to nailed connections, little research has been done on bolted connections using a reversed cyclic loading scheme, although cyclic loading provides important information about energy absorption and damping properties, which is essential when analyzing seismic performance. Dowrick (1986) noted that the hysteretic characteristics for the primary connection of a subassembly govern its ...

When earthquakes occur, energy released by the earthquake gets induced into the structure as ground motion and this energy has to be dissipated for safety reasons. To release seismic energy, the structure should damage in such a way that on one hand, collapse of structure should not occur and on the other hand, after the earthquake, damage should be economically feasible to repair. To avoid the...

this paper presents the results of a series of monotonic and post-cyclic triaxial tests carried out on a clay specimen and three types of clay-sand mixed specimens. the focus of the paper is on the post-cyclic mechanical behavior of the mixed specimens, as compared to their monotonic behavior. analyses of the tests results show that cyclic loading degrade undrained shear strength and deformatio...

This paper presents the micromechanical modeling of fiber bridging constitutive law of a discontinuous fiber reinforced composite (DFRC) under cyclic loading. Fiist, the derivation of fiber bridging constitutive law under monotonic loading is briefly reviewed to highlight he approach to obtain the bridging stress carried by randomly distributed discontinuous fibers. Second, the relation between...