A three-phase model is presented that predicts solid deformation and damage as well as melt pressure, feeding flow and shrinkage porosity during metal casting. A visco-plastic constitutive theory with damage is used to model the solid deformation. Damage created by mechanically induced voiding is used as a hot tear indicator. The absence of liquid feeding determines when damage starts to form. ...

The evolution of texture as a function of recrystallization has been characterized for hot-rolled AA1050. Samples prepared from a hot rolled sheet were annealed isothermally for sufficient time to allow complete recrystallization. The spatial orientation variation within the deformed microstructure of nucleation, growth and orientations of recrystallized grains is examined. The microstructural ...

ABSTRACT: Mustard is a natural multi-functional additive with strong hot flavor. In this research, powdered yellow mustard (Sinapis alba) was heated by 21 different thermal processes, statistically designed by Response Surface Methodology to evaluate the effects of combinations of heating media (hot air, hot water and steam) and heating time (0-20 min) on residual myrosinase activity, the minim...

The quality and quantity of agricultural products depend on land reclamation. Collector-drainage systems are used to improve the reclamation state irrigated areas. article discusses stability slopes open collector-drainage networks in lands Hungry Steppe. Discussed problems create during construction providing productivity drainages system irrigation fields. causes deformation process discussed...

The aim of the present study is the prediction of critical conditions (including critical strain and flow stress) for the initiation of dynamic recrystallization during thermo-mechanical processing of plain carbon steels. For this propose, torsion tests were conducted at different temperature (1050, 1100 and 1150˚C) and strain rates (0.002, 0.02 and 0.2/s). All flow curves showed a peak st...

the full annealing aa6061 aluminum alloy was subjected to severe plastic deformationvia the combination of equal channel angular pressing (ecap) and cold rolling (cr) in order torefine its microstructure and to improve its mechanical properties. according to the results of hotand cold tensile tests, the combination of ecap and cr significantly affected the final strengthand ductility of studied...

The process of ductile fracture which occurs due to the accumulation, growth and combination of defects or cracks of material is called ductile damage. Failure in materials can be predicted, using damage mechanics and damage criteria. On the other hand, most of the materials depended to the manufacturing process, are formed in warm or hot conditions so that; the temperature also affects on the ...

In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...