In this paper, a novel approach based on the Thévenin tracing is presented to modified conventional impedance-based out-of-step (OOS) protection. In conventional approach, the OOS detection is done by measuring positive sequence impedance. However, the measured impedance may be change due to different factors such as capacitor bank switching and reactive power compensators that it can cause the...

Thin film microfabrication technique was employed to fabricate a platinum based parallel-electrode structured impedance sensor. Electrochemical impedance spectroscopy (EIS) and equivalent circuit analysis of the small amplitude (±5 mV) AC impedance measurements (frequency range: 1 MHz to 0.1 Hz) at ambient temperature were carried out. Testing media include 0.001 M, 0.01 M, 0.1 M NaCl and KCl s...

A GaAs/A1GaAs traveling wave Mach-Zehnder electro-optic modulator with novel slow wave electrodes was fabricated on undoped epitaxial layers. Using appropriate electrode engineering velocity matching with matched impedance and low microwave loss was achieved. Device had a measured electrical bandwidth greater than 40 GHz at 1.55 j.un. The measured bandwidth at 1.3 j.m was 37 GHz. The mechanism ...

in exploration seismology, estimation of elastic parameters of rocks using seismic amplitudes is considered as inverse problems. nowadays, model-based and more generally optimization-based algorithms are of the most common methods of seismic inversion. these algorithms which are known as deterministic methods, are suffering from two main problems; first, vertical resolution of outputs is very l...

A novel, highly effective and environmentally friendly film-forming material, phytic acid (PA)/silane (denoted as PAS) hybrid with a three-dimensional (3D) network structure, was prepared through a condensation reaction of PA with methyltrihydroxysilane generated from the hydrolysis of methyltriethoxysilane (MTES). Two kinds of PAS-based pretreatment layers, namely NaBrO3-free and NaBrO3-doped ...

In the thesis the aim was to detect the high impedance fault occurring on radial distribution system using a new generic search algorithm. A Three layer perceptron was used for distinguishing the linear and nonlinear high impedance faults by taking the feature vector as input value of third and fifth harmonic components of feeder voltage and feeder current were used as a feature vector obtained...

Matched layers are commonly used in numerical simulations of wave propagation to model (semi-)infinite domains. Attenuation functions describe the damping in layers, and provide a matching of the wave impedance at the interface between the domain of interest and the absorbing region. Selecting parameters in the attenuation functions is non-trivial. In this work, an optimisation procedure for au...

Here we present research detecting the invasive activities of metastatic cells in vitro using electric cell-substrate impedance sensing (ECIS). The assay is based on previous microscopic observations, where metastatic cells added over established endothelial cell layers were observed to attach to and invade the cell layer. Human umbilical vein endothelial cells (HUVECs) werefirst grown to confl...