Objective The current standard used to measure setting time for Mineral Trioxide Aggregate (MTA) involves indentation testing with arbitrary weights. This study compared indentation testing against rheological measurements and assessed the influences of particle size and the inclusion of bismuth oxide on the setting time of experimental MTA and Portland cement (PC). Material and methods Two PCs...

Nanoindentation testing is a technique that determines the mechanical properties of a material in the sub-micron scale. The test involves penetrating a sample material using an indenter, while the penetration depth and load are recorded so that the stiffness and hardness of the indented location can be subsequently calculated. The continuous stiffness measurement technique offers a tool to prob...

Cordierite was adhered to molybdenum using various metallic interlayers of copper, nickel, and chromium. The development of a coating adhesion test methodology was required to choose between interface designs. An indentation method was chosen because of ease in testing and availability of fracture mechanics interpretations of test data. The interfacial fracture toughness was determined from ind...

Problem statement: Dammar is a natural resin that used anciently in varnish production. The use of dammar natural resin in coating is limited by undesirable properties for application in coating where it is considered very brittle. Due to dammar's brittle nature, an aged dammar coating can be easily scratched or abraded. Approach: Dammar natural resin could be modified into SiliconeDammar by us...

In this paper, the authors present a new methodology to study the viscoelastic behaviour of the human finger. The methodology is based on experimental research consisting of a finger's indentation with a small steel cylindrical object for various indentation speeds. The tests were realized on a CETR UMT-2 Tribometer for indentation speed between 0.02 mm/s and 4 mm/s with a normal load of up to ...

Abstract Evaluating local mechanical properties of parts made by additive manufacturing processes can improve the deposition conditions. This study proposes a non-destructive characterization test to determine behavior fused modeling (FDM) components. Indentation and compression tests were conducted on samples produced FDM process, which created varying material flow during deposition. An empir...

BACKGROUND The aim of this study was the characterization of mechanical properties of representative types of orthodontic wires employing instrumented indentation testing (IIT) according to ISO 14577. METHODS Segments were cut from ten wires. The first six are made of stainless steel (SS), two are made of Ni-Ti, and the last two are made of titanium molybdenum alloys (TMA). Then, the Martens ...

Characterizing the dynamic mechanical properties of brain tissue is deemed important for developing a comprehensive knowledge of the mechanisms underlying brain injury. The results gathered to date on the tissue properties have been mostly obtained in vitro. Learning how these results might differ quantitatively from those encountered in vivo is a critical step towards the development of biofid...

PURPOSE To determine how mechanical interaction among iris, cornea, limbus, sclera, and IOP contribute to angle opening during indentation of the cornea or sclera. METHODS A finite-element model of the globe was developed. The model consisted of three elastic isotropic segments--iris, cornea, and sclera--and a two-component anisotropic segment representing the limbus. The model was tested aga...

Introduction Most in vivo indentation techniques are limited by the lack of adequate indentation on the plantar tissue. Without sufficient indentation into the soft tissue, only very little and less representative information can be obtained. The purpose of this study is hence to assess the effect of deformation depth on plantar tissue behavior and to establish a set rule of optimum indentation...